**Steel Market Update – April 5, 2025** Below is a comprehensive overview of the latest steel prices and trends in China. Prices are listed in RMB per ton, with comparisons to yesterday’s closing prices and last week’s levels. --- ### **Rebar & High Tensile Wire** - **High Line (Φ6.5mm Q235)** - Xing Steel: ¥5,150 (+30/ +30) - Haixin: ¥5,150 (+30/ +30) - Rizhao: ¥5,150 (+30/ +30) - Nangang: ¥5,200 (+50/ +50) - Sha Steel (Q335): ¥5,200 (+50/ +50) - Yong Steel (Q335): ¥5,200 (+50/ +50) - Ma Steel (Q335): ¥5,200 (+50/ +50) - **Rebar (HRB335)** - Sand Steel (Φ10mm): ¥5,120 (+30/ +30) - Sand Steel (Φ12mm): ¥5,070 (+30/ +30) - Sand Steel (Φ14mm): ¥5,050 (+10/ +10) - Sand Steel (Φ16–25mm): ¥5,050 (+10/ +15) - Yong Steel (Φ10mm): ¥5,110 (+20/ +20) - Yong Steel (Φ12mm): ¥5,040 (+20/ +0) - Yong Steel (Φ16–25mm): ¥5,020 (+0/ -10) - Masteel (Φ16–25mm): ¥5,030 (0/ 0) - NAN Steel (Φ16–25mm): ¥5,030 (0/ 0) - **Threaded Steel (HRB335)** - Plant (Φ16–25mm): ¥4,980 (0/ 0) - Jiangyin Up (Φ18–25mm): ¥4,960 (0/ +30) - Anyang Xinyang (Φ16–25mm): ¥4,960 (0/ +30) - Shaanxi Longgang (Φ16–25mm): ¥4,960 (0/ +30) - Haixin (Φ18–25mm): ¥4,980 (0/ +50) - Ma Changjiang (Φ18–25mm): ¥4,950 (0/ +40) - **Grade III Rebar (HRB400)** - Masteel/Yong Steel (Φ18–25mm): ¥5,150 (0/ 0) - Sha Steel (Φ16mm): ¥5,150 (0/ 0) - Sha Steel (Φ18–25mm): ¥5,150 (0/ 0) - Ping Steel (Φ18–25mm): ¥5,080 (+40/ +40) - Nanchang (Φ18–25mm): ¥5,080 (+40/ +40) - Rizhao (Φ18–25mm): ¥5,080 (+40/ +40) --- ### **Round Steel & Hot Rolled Coils** - **Round Steel (Q235)** - Yong Steel (Φ10mm): ¥5,090 (0/ 0) - Yong Steel (Φ12mm): ¥5,080 (0/ 0) - Yong Steel (Φ14mm): ¥5,070 (0/ 0) - Yong Steel (Φ16mm): ¥5,060 (0/ 0) - Yong Steel (Φ18–20mm): ¥5,050 (0/ 0) - **Hot Rolled Coil (Q235)** - Handan Steel (2.75mm*1500*C): ¥5,500 (0/ 0) - Handan Steel (5.5mm*1500*C): ¥5,450 (0/ 0) - Shagang (3.0mm*1500*C): ¥5,550 (0/ 0) - Shagang (5.5mm*1250*C): ¥5,450 (0/ 0) - Rizhao (4.5mm*1250*C): ¥5,420 (0/ 0) - Masteel (2.75mm*1500*C): ¥5,700 (0/ 0) - Tang Gang (2.75mm*1500*C): ¥5,500 (0/ 0) --- ### **Cold Rolled Sheets & Strip** - **Cold Rolled Sheet (DC01)** - Wuhan Iron & Steel (1.0mm*1250*2500): ¥6,450 (0/ -50) - Wuhan Iron & Steel (1.2mm*1250*2500): ¥6,400 (0/ -80) - Wuhan Iron & Steel (1.5mm*1250*2500): ¥6,400 (0/ -80) - Wuhan Iron & Steel (2.0mm*1250*2500): ¥6,400 (0/ -80) - Masteel (1.0mm*1250*2500 ST12): ¥6,450 (0/ -50) - Meigang (1.5mm*1250*C ST12): ¥6,400 (0/ -100) - **Strip (Q235)** - Beitai (3.0*700): ¥5,400 (0/ 550) - Beitai (5.75*720): ¥5,300 (0/ 550) - Beitai (9.5*720): ¥5,300 (0/ 550) --- ### **Flat Products & Plates** - **Puzhong Plate (Q235)** - Xinyu (6mm): ¥6,650 (0/ 250) - Xinyu (10mm): ¥6,250 (0/ 100) - Nangang (8mm): ¥6,500 (0/ 200) - Nansteel (14–20mm): ¥6,050 (0/ 70) - Masteel (10mm): ¥6,250 (0/ 50) - **Low Alloy Plate (Q345)** - Nangang (6mm): ¥6,600 (0/ 100) - Masteel (14–20mm): ¥6,300 (0/ 200) - Feida (14–20mm): ¥6,250 (0/ 200) - **Boiler Plate (20g)** - Nangang (8mm): ¥7,400 (0/ 350) - Nangang (12mm): ¥6,930 (0/ 350) - **Container Plate (16MnR)** - Xinyu (8mm): ¥7,440 (0/ 220) - Nangang (14–25mm): ¥6,920 (0/ 220) --- ### **Pipe & Structural Steel** - **Seamless Pipe (20#)** - Wuxi (25*2.5): ¥7,500 (0/ 0) - Wuxi (48*4): ¥6,700 (0/ +50) - **I-beam (Q235)** - Laiwu Steel (20#/b): ¥5,200 (0/ -100) - Laiwu Steel (36#/b): ¥5,450 (0/ +200) - **Channel & Angle Steel** - Ma Steel (16#a): ¥5,350 (0/ +50) - Wu Steel (25#): ¥5,550 (0/ +50) - Ma Steel (50*50*5mm): ¥5,450 (0/ +100) --- ### **Galvanized Coils** - **JY Galvanized Coil (Wuhan Iron & Steel)** - 0.5mm*1000*2000: ¥6,900 (0/ +150) - 1.0mm*1000*2000: ¥6,650 (0/ +200) - **ST02Z Galvanized Coil (Benxi/Bengang)** - 0.5mm*1000*2000: ¥6,900 (0/ +180) - 1.0mm*1000*2000: ¥6,630 (0/ +180) --- **Market Note:** The steel market remains relatively stable this week, with slight fluctuations in rebar and galvanized coil prices. Demand has been steady, especially for construction materials. Buyers are advised to monitor supply chain updates and potential policy changes that may affect pricing in the coming days.

Steel Rod

Steel bars are divided into hot rolling, forging and cold drawing

The diameter of cold drawn bar steel is 3-100 mm, and the dimension precision is high.
Bar steel is widely used as semi-finished raw materials of various deep-processing steels.

 

Material: Carbon Steel, Stainless Seel, Copper, Nickel , Aluminum, Titanium etc

Shape: Round, Square, Rectangle, Hex, Twisted, Rebar

 

Applications
Steel bar is adaptable to a wide range of applications, making it a cost-effective material solution for all types of commercial and industrial products. Common applications for steel bar include:

Construction & architecture
Automotive & transportation
Gas & oil
Renewable energy
Heavy industry
and many, many more

Steel Rod,Steel Round Rod,Stainless Steel Rod,Stainless Steel Round Rod

TORICH INTERNATIONAL LIMITED , https://www.steeltubepipechina.com