The coefficient of exothermic coefficient of water efficiency is the mathematical model of the claw heat sink performance. Taking the tube radiator as the research object, taking the unit body analysis, the working condition of the tube radiator can be regarded as the non-contact of water and air flowing through the rectangular straight ribs. The heat transfer of the wall surface is checked. Matching of the Radiator The preferred target for calculating the flow rate of water in the pipe is currently ascribed to a design that satisfies a given requirement and the limit condition has a minimum value. For a given heat dissipation and the size of the radiator defined in the front structure, there may be several combinations of different heat sink core-type materials, such as wind speed and water flow rate, that meet the heat dissipation requirements. The number of rows may increase, the number of tubes may increase, and the number of tubes may increase. The heat dissipation capacity will increase, but at the same time it will increase the material consumption, wind resistance will increase, while the cooling system power consumption and noise mainly comes from the fan, so this article takes the heat dissipation of the radiator to w and the material consumption to calculate the smallest product The preferred goal is to establish a calculation formula. The relative error of heat dissipation in the computer program flowchart The matching and optimization of the heat sink including the change of parameters The calculation of the performance of the qualified program and the selection of the best solution. These tasks are programmed by the computer. The relative error of the heat dissipation of the application example is appropriate. Adjustable. The actual operation of the car has a face-up effect. The accuracy of computer program calculations depends on the accuracy of the mathematical model. There is a certain deviation between the mathematical model of this article and the actual problem, but the deviation is not large, and always maintain the same trend. The inspection and analysis of the computer optimization design method for an automobile basically reflects the actual situation and can be used for actual design and analysis of similar models.
Stainless steel Stock pot manufacturer in China
A stock pot can be used to make stock,broth,cooking stews,porridge,boiled foods,steamed shellfish,and many kinds of recipes.It is one of the most common types of cooking pot used worldwide.It is a wide pot with a flat bottom,straight sides,a wide opeaning to the full diameter of the pot,two handles on the sides,and a lid with a handle on top.We have variety of sizes to meet any need from cooking for a family to preparing food for a banquet.We are professional manufacturer of stainless steel cookware in Jiangmen.All of our products need to pass strict inspection before shipment.
Stainless Steel Stock Pot,Stock Pot,Large Stock Pot,Large Cooking Pots Jiangmen Yuesheng Metal Products Co., Ltd. , https://www.bestgain-hk.com