ED-300 Automatic Tape Dispenser is also called tape cutting machine and adhesive tape cutting machine. It is a tape cutting machine. It is widely used in the field of adhesive tape packaging. It belongs to semi-automatic industrial equipment. Its origin is Japan, brand: ASUTECH, model : ED-300, product alias: ED-300 tape cutting machine, type: tape machine, use: tape cut. 2, ED-300 automatic tape machine specifications Size (mm): 140*157*240 (with adhesive roller) 140*140*205 (less than adhesive roller) Voltage: AC100V Working temperature: 5-40°C Power: 18W tape length Setting range: Automatic 15mm-999mm Manual 15mm-∞ Tape outer diameter: 7mm-50mm 3, the characteristics of ED-300 automatic tape dispenser As long as it is wide 50mm all kinds of adhesive tape can be fully automatic cut off. Cut size can be set to 1mm units, automatically send automatically cut off. With static electricity prevention device. After the tape is used up, automatic conversion from automatic mode to manual mode After the power is turned off and on again, the previous cut-off dimension record can be retained. 3-inch pressure roller. Electronic tone, red indicator light alarm function. (Displayed when the machine status is abnormal.) Can be cut at the same time. Job. When the adhesive tape is stuck, it will automatically switch from fully automatic mode to manual mode. Applicable adhesive type: clear plastic, glass adhesive, cloth adhesive, Filament tape, etc. High-speed Injection Molding Machine
Rainbow high speed injection molding machine have "5H" characteristcs. "5H" means High Speed, High Energy-saving, High Precision, High Efficiency and High Safety.
1. High Speed--High precision single cylinder injection system, suitable to high speed injection, low inertia, fast response to speed up and down; maximum injection speed 300~450mm/sec; 30ms response time of speed up and down.
2. High Energy-saving--Equipped with high performance servo system to save power 30%~80% than normal injection molding machine.
3. High Precision--Adopts European high grade KEBA controller to control a high precision injection positin and temperature; equipped with high precision MOOG servo valve full close loop injection system;l double cylinder for injection carriage for balance;
4. High Effciency--The newest optimized design for clamping unit, the clamping motion is fast and stable; plasticization and ejection at the same time, to save molding cycle time; big L/D ratio screw to plasticize material in the shot time;
5. High Safety--Electrical, mechanical and hydraulic protection device; indipendent safety module to control clamping, injection, feeding and carriage moving; hidden type safety device to inprove security; totally enclosed type sheet metal.
High Speed Injection Molding Machine,High Speed Plastic Injection Machine,Electric Injection Molding Machine Ningbo Rainbow Plastics Machinery Co., Ltd. , https://www.injection-machine.com