The cooling system is very important for the construction vehicle Engine . After a certain period of use, various precipitations will occur inside. The type of sedimentation varies due to different vehicle maintenance conditions. For most engineering vehicles, water is used normally, and antifreeze is used in winter. In this case, the precipitate produced is mainly scale; some owners use antifreeze for a long time, and the precipitation that appears is scale and gel. The Lord's dirt. The main reasons for the failure of the cooling system are: high engine water temperature in summer, low engine water temperature in winter, and leakage of cooling system. There are many reasons for engine overheating. The most common cause is the result of the cooling system's cooling effect due to the internal fouling and sedimentation of the cooling system blocking the channel. A common practice to rule out such failures is to disassemble the tank for a full replacement, but it turns out that many cars have not improved as a result. Leakage of the engine cooling system mainly takes the form of leaking water tanks, water leakage from the upper and lower water pipes, and water leakage from the cylinder mats. To deal with the engine temperature is too high, especially due to the problems caused by excessive dirt and sedimentation, we can use high-end cleaning agent with the manufacturer's special equipment for processing. When choosing a cleaning agent, we have 3 recommendations: For a significant portion of the precipitated material, cleaning with an acidic cleaner will have a good effect. If the gel is not hard, it can be cleaned with alkaline or non-corrosive cleaners. For oily substances that appear in the cooling system, use acidic cleaners for cleaning. Considering all the three conditions mentioned above, and the precipitation in the engine cooling system that I have passed is mainly oily substances and rust. The cleaner used must be acidic to be suitable for the domestic automotive market. At present, the alkaline cleaners that I've been on the market are mainly based on the fact that it can only adapt to the needs of a small number of cars. The above is a brief introduction of Xiao Bian’s maintenance of the engine of the engineering vehicle. If there are still problems, we can contact our staff. (Wen/Jun Xun)
The brush cutter has a handle design, easy to start and operate, with a shoulder strap and easy to operate.
Henan Qianli Machinery CO. Ltd is a profession manufacture of Farm Tractor, rice machine, Reaper Machine, Power Tiller, garden machine and other farm implements. Our factory was established in 1987 and has more than 30 years of production and sales experience. We focus on providing customers with high-quality products and excellent services.
Best Brush Mower,Brush Cutter Price,Rotary Brush Cutter,Electric Brush Cutter Henan Qianli Machinery Co.,Ltd. , https://www.chalionagri.com