In the search for news on sewage trucks on the Internet, there have been incidents where the tanks of the sewage suction trucks have exploded or have been sucked. Although there have been such incidents, there are still very few people who are concerned about this matter. But for the driver of the sewage suction truck, after seeing such news, there are people who have some changes in the idea of ​​purchasing a sewage suction truck. In fact, there is no need to worry about purchasing high-quality sewage from a qualified manufacturer. The car will not have such a sudden phenomenon. When there are some owners, in consultation with suction sewage truck details, will be transferred to a strong mass of the vehicle body, as some colleagues at the time of purchase of the vehicle, is also carried out several products after price comparison, because there is a suction Sewage car prices are tens of thousands of dollars cheaper than others, and in order to save on their own purchase costs, they eventually chose the ultra-low-cost sewage suction sewers. Finally, they did not reach the warranty period. What happened. Finally, it has always been that low-cost manufacturers are communicating and shirking responsibility because they are caused by improper operation of the driver. They do not assume any responsibility. Finally, they go through quality inspections. The nature is that the use of materials does not meet the standards. Industry failed. Then, when it comes to procurement, how can we properly identify whether the tank of a sewage suction truck is qualified? 1. The material of the tank to be inspected for the sewage suction truck is not a qualified carbon steel material. Normally, the 6 or less sewage suction trucks are used for the 5 mm steel plate material, and the 6 and 6 squares are used. For the above-mentioned 6 mm steel plate materials, some manufacturers of black cores use ordinary steel plates to deal with the use of the steel plates in order to save the use cost. This will result in easy use of the vehicle's tank during use. There will be a case of being sucked. 2. It is necessary to check whether there is any liner in the middle of the inside of the tank of the sewage suction truck. The main purpose of the liner is to prevent the tank from being sucked. It is necessary to observe the interior of the rear head of the suction truck again. There is no support, the general situation is that there are six pillars, the main role of the pillar is to prevent the rear head is often deformed in the hydraulic closing and opening, after the deformation of the tank sealing effect is the case of a drip, Affects the normal use of sewage trucks . Naturally, in order to reduce the cost, some manufacturers will save important parts such as liners, which will lead to the occurrence of tank suction and tank explosion. When buying a sewer truck, be sure to look into the field to check some of the vehicle's composition and materials. (Text / Sun Ni) Metal clamp-in tubeless valves are used in passenger car or light truck tires. It`s made of copper stem and valve core inside. We supply a full range of high quality tubeless metal Tire Valves including TR33E, TR43E. TR48E, TR67E, TR416, VS-6, VS-8 and high performance tubeless tire valve MS525 series. Tubeless Metal Clamp-in Tyre Valves,Automobile Tubeless Valve Ningbo Heyu Tire Repairs Co., Ltd. , https://www.autorepairstools.com
