3-10L; 3-5 Gallon Filling Machines Water Bottling Filling Machine,Water Filling Machine,Water Bottling Machine Zhangjiagang Chunyuan Machinery Co.,Ltd , http://www.chunyuanmachine.com
1) Standard: API 11AX
2) API and ISO certified
3) Type:Â Rod Pump, Tubing Pump
4) Photo
5) Description
The rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing.Â
Â
The workover process of tubing pump is: firstly the barrel being connected to the tubing is directly run into the well at desired depth and then the plunger is run into the barrel with the sucker rod.
Â
6) Working Principle
Â
In the upper stroke, the plunger is on the bottom of the tubing pump. Because the hydraulic pressure from the uper tubing, both up and traveling valves will close, When the plunger go up, the stationary valve open and oil will go through the pump, since the bottom pressure is higher than the uper pressure, then the fluid will be forced to go through the stationary valve and flow into the tubing.
In the down stroke,the traveling valve open and the presure drive the oil go into the plunger from the side holeof the extractor, then go into the tubing.
Â
7) Structure
The subsurface sucker rod pump is consist of tubing coupling, extension nipple, barrel coupling, barrel, traveling valve, plunger, extractor, stationary valve.Â
Â
8) Parameter
Tubing Pump
Specification
Nominal Bore
In(mm)
Plunger Length
Ft(m)
Ma. O.D.
(mm)
Rod
In
Tubing
In
Stroke
Ft(m)
20-125TH
1.25(32)
4-6
(1.2-1.8)
73
3/4
2 3/8
Â
Â
26.25(8.0)
20-150TH
1.50(38)
73
3/4
(5/8)
2 3/8
20-175TH
1.75(44)
73
3/4
2 3/8
25-175TH
1.75(44)
88.9
3/4
2 7/8
25-200TH
2.00(51)
88.9
3/4
2 7/8
25-250TH
2.50(63.5)
88.9
3/4
3 1/2
30-275TH
2.75(70)
108
3/4
3 1/2
35-325TH
3.25(83)
116
3/4
4 1/2
40-375TH
3.75(95)
116
1
4
 Rod Pump
Specification
Nominal Bore
In(mm)
Plunger Length
Ft(m)
Ma. O.D.
(mm)
Rod
In
Tubing
In
Stroke
Ft(m)
20(25)-125RHAC
RHAM
 1.25(32)
 4-6
(1.2-1.8)
    Â
 47.5/47.6
 0.75    Â
 2 3/8(2 7/8)
 24.61(7.5)    Â
 25-150RHAC
RHAM
 1.50(38)
 59.4/59.5
 2 7/8
 25-175RHAC
RHAM
 1.75(44)
 59.4/59.5
 2 7/8
 25-200RWAC
RWAM
 2.00(51)
 59.4/59.5
 2 7/8
 30-225RHAC
RHAM
 2.25(57)
 72.1/72.2
 3 1/2
 30-250RWAC
RWAM
 2.50(63.5) 72.1/72.2
 3 1/2
9) Material and Surface Treatment
Â
Parts
Material, Surface treatment
Special requirements
Barrel
Carbon Steel, Chrome plate, nickel-phosphorous plate,
carbonitriding, carburized
Brass barrel
Plunger
Carbon steel, nickel spray, chrome plate
Double chrome plate
Ball &Â Seat
Stainless steel, Tungsten carbide, Titanium carbide
Nickel carbide
Cage
Alloy steel
Hard-lined
Package
Certificate
Company Information
Puyang Zhongshi Group Co., Ltd is a professional manufacturer of various oilfield equipments and cementing accessories since 1997, restructured enterprise of SINOPEC.Â
Â
We have the certificates of API 5CT, API 10D, API 11E, API 6A, API 11AX, ISO 9001 and ISO 14001, etc.. Â
Â
Our  products mainly include:Â
Â
1. Casing Centralizer                          2.  Float Collar & Float ShoeÂ
3. Cementing Plug                              4.  Cementing Head
5.  Cement Basket                              6.  Tubing Pump / Rod Pump
7.  Valve Ball & seat                            8. Casing / Tubing Pipe and Coupling
9. Stage Collar                                    10. Pumping Unit
11. Air Blaster                                      12.  Sucker Rod
Â
Our group have more than 10 years export experience and 9 subsidiary factories, more than 500 employees. We are the first-class supplier of resources market of SINOPEC and CNPC.  Our foreign customers are mainly from America, Central Asia, Russia, Southeast Asia, Middle East, etc.
Contact Us
PUYANG ZHONGSHI GROUP CO.,LTD
Add: 5th community, Zhongyuan Oilfield, Puyang, China
Tel: 0086-371-87096211 / 15838304721
Fax: 0086-371-87096212Â
Website: www.zs-oilfieldequip.com;
                 www.chinajixie.com
                 www.casingcentralizer.com
Irene is here waiting for you!!
Oil Sucker Rod Pump, Tubing Pump, Rod PumpÂ
1) Standard: API 11AX
2) API and ISO certified
3) Type:Â Rod Pump, Tubing Pump
4) Photo
5) Description
The rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing.Â
Â
The workover process of tubing pump is: firstly the barrel being connected to the tubing is directly run into the well at desired depth and then the plunger is run into the barrel with the sucker rod.
Â
6) Working Principle
Â
In the upper stroke, the plunger is on the bottom of the tubing pump. Because the hydraulic pressure from the uper tubing, both up and traveling valves will close, When the plunger go up, the stationary valve open and oil will go through the pump, since the bottom pressure is higher than the uper pressure, then the fluid will be forced to go through the stationary valve and flow into the tubing.
In the down stroke,the traveling valve open and the presure drive the oil go into the plunger from the side holeof the extractor, then go into the tubing.
Â
7) Structure
The subsurface sucker rod pump is consist of tubing coupling, extension nipple, barrel coupling, barrel, traveling valve, plunger, extractor, stationary valve.Â
Â
8) Parameter
Tubing Pump
Specification
Nominal Bore
In(mm)
Plunger Length
Ft(m)
Ma. O.D.
(mm)
Rod
In
Tubing
In
Stroke
Ft(m)
20-125TH
1.25(32)
4-6
(1.2-1.8)
73
3/4
2 3/8
Â
Â
26.25(8.0)
20-150TH
1.50(38)
73
3/4
(5/8)
2 3/8
20-175TH
1.75(44)
73
3/4
2 3/8
25-175TH
1.75(44)
88.9
3/4
2 7/8
25-200TH
2.00(51)
88.9
3/4
2 7/8
25-250TH
2.50(63.5)
88.9
3/4
3 1/2
30-275TH
2.75(70)
108
3/4
3 1/2
35-325TH
3.25(83)
116
3/4
4 1/2
40-375TH
3.75(95)
116
1
4
 Rod Pump
Specification
Nominal Bore
In(mm)
Plunger Length
Ft(m)
Ma. O.D.
(mm)
Rod
In
Tubing
In
Stroke
Ft(m)
20(25)-125RHAC
RHAM
 1.25(32)
 4-6
(1.2-1.8)
    Â
 47.5/47.6
 0.75    Â
 2 3/8(2 7/8)
 24.61(7.5)    Â
 25-150RHAC
RHAM
 1.50(38)
 59.4/59.5
 2 7/8
 25-175RHAC
RHAM
 1.75(44)
 59.4/59.5
 2 7/8
 25-200RWAC
RWAM
 2.00(51)
 59.4/59.5
 2 7/8
 30-225RHAC
RHAM
 2.25(57)
 72.1/72.2
 3 1/2
 30-250RWAC
RWAM
 2.50(63.5) 72.1/72.2
 3 1/2
9) Material and Surface Treatment
Â
Parts
Material, Surface treatment
Special requirements
Barrel
Carbon Steel, Chrome plate, nickel-phosphorous plate,
carbonitriding, carburized
Brass barrel
Plunger
Carbon steel, nickel spray, chrome plate
Double chrome plate
Ball &Â Seat
Stainless steel, Tungsten carbide, Titanium carbide
Nickel carbide
Cage
Alloy steel
Hard-lined
Package
Certificate
Company Information
Puyang Zhongshi Group Co., Ltd is a professional manufacturer of various oilfield equipments and cementing accessories since 1997, restructured enterprise of SINOPEC.Â
Â
We have the certificates of API 5CT, API 10D, API 11E, API 6A, API 11AX, ISO 9001 and ISO 14001, etc.. Â
Â
Our  products mainly include:Â
Â
1. Casing Centralizer                          2.  Float Collar & Float ShoeÂ
3. Cementing Plug                              4.  Cementing Head
5.  Cement Basket                              6.  Tubing Pump / Rod Pump
7.  Valve Ball & seat                            8. Casing / Tubing Pipe and Coupling
9. Stage Collar                                    10. Pumping Unit
11. Air Blaster                                      12.  Sucker Rod
Â
Our group have more than 10 years export experience and 9 subsidiary factories, more than 500 employees. We are the first-class supplier of resources market of SINOPEC and CNPC.  Our foreign customers are mainly from America, Central Asia, Russia, Southeast Asia, Middle East, etc.
Contact Us
PUYANG ZHONGSHI GROUP CO.,LTD
Add: 5th community, Zhongyuan Oilfield, Puyang, China
Tel: 0086-371-87096211 / 15838304721
Fax: 0086-371-87096212Â
Website: www.zs-oilfieldequip.com;
                 www.chinajixie.com
                 www.casingcentralizer.com
Irene is here waiting for you!!
Model NO.: Tubing Pump, Rod Pump
Trademark: Zhongshi
Transport Package: Iron Case or Plywood Case
Specification: API, ISO
Origin: Henan, China
HS Code: 8431
Model NO.: Tubing Pump, Rod Pump
Trademark: Zhongshi
Transport Package: Iron Case or Plywood Case
Specification: API, ISO
Origin: Henan, China
HS Code: 8431
Oil Sucker Rod Pump, Tubing Pump, Rod PumpÂ