This kind of Drilling and Tufting Brush Machine is equipped with 2 drill heads and a hair planting head, human-machine touch screen control system, and optional Chinese or English language. The operation is flexible and convenient. The accessorie of the machine are all designed according to European standards. Two-color or single-color brush can be used in this machine.
Technical Parameters:
1. Weight: 1500kg
2. Planting method: Round wire
3. Production speed: 500 rpm
4. Planting peak: 65mm
5. Planting pore size: φ1.6-φ4.0
6. Storable procedures: 1000 models
7. X-axis travel: 400mm;
8. Y-axis travel: 320mm;
9. Z-axis travel: 160mm;
10. Air input pressure: 0.8MPa
11. Rated voltage frequency single phase: 220V, 50Hz
12. Machine power: 2.0kw
13. Machine dimensions: 1.14 meters long, 1.84 meters wide and 1.75 meters high
14. Packing size: 1.8 meters length, 2.1 meters width, 2.1 meters height (conforming to standard container requirements).
More details, please contact us as soon as possible.
4 Axes Drilling And Tufting Brush Machine Brush Machine 4 Axis Flat Wire,4 Axis Round Wire Brush Machine,Flat Wire Brush Machine,4 Axis High Speed Brush Machine Yangzhou Blue State Digital Control Brush Equipment Co., LTD. , http://www.lbbrushmachine.com
1. Adopt the soft switch technology, high efficiency, low power consumption
2. Automatic protection from overcurrent, overheat, over/under voltage
3. Support TIG welding and MMA welding
4. Up/down-slope of welding current continuously adjustable, pre-gas sending and delay gas sending
5. HF automatically strikes arc, and automatically extinguishes after the arc is successfully stroke
6. In TIG welding, the long/short seam switch can support the switch between continuous welding and discontinuous welding. The build-in circuit guarantees a good arc-ignition and crater filling, and endows the machine with such features as easy to start arc, arc heat concentrated, good gas protection result, etc.
7. In MMA welding, can be used together with all kinds of electrode with a diameter below 0.5mm. In TIG welding, can weld stainless steel, alloy steel, copper, silver, titanium
8. With arc-striking current adjustment switch, can easily adjust the arc-striking current, optimize the arc ignition effect. The pushing current adjustment knob can strengthen the arc force and prevent the welding electrode stuck to workpieces
9. Can be equipped with the distance control box to realize distance control, simplify the operation
10. Can be used in welding the stainless steel parts, pressure container and pipeline, realize TIG grounding and TIG covering once a time, greatly improve the working efficiency
11. A voltage fluctuation of ± 20% is allowable
WS7-315
WS7-400
WS7-500
Power source
3-phase 380V/415V 50Hz
Rated input capacity
12.2KVA
17.3 KVA
23.7 KVA
Rated input current
18.6A
26.3A
36A
Rated welding current
315A
400A
500A
Welding current
315A 60%DE
400A 60%DE
500A 60%DE
250A 100%DE
315A 100%DE
400A 100%DE
Adjustment range of current
20-315A
20-400A
20-500A
Efficiency
83%
No-load voltage
TIG
40-50V
MMA
70-80V
Current up/down-slope time
0-10S
Time for pre-gas sending
1S
Time for delay gas sending
5S
Dimensions (mm)
500×260×360
550×260×360
Weight (Kg)
35
40
55
Air switch
32A
32A
40A
Input cable (mm 2 )
3×4+1×2.5
3×4+1×2.5
3×6+1×4
Insulation class
F
Protection class
IP21
1. Adopt the soft switch technology, high efficiency, low power consumption
2. Automatic protection from overcurrent, overheat, over/under voltage
3. Support TIG welding and MMA welding
4. Up/down-slope of welding current continuously adjustable, pre-gas sending and delay gas sending
5. HF automatically strikes arc, and automatically extinguishes after the arc is successfully stroke
6. In TIG welding, the long/short seam switch can support the switch between continuous welding and discontinuous welding. The build-in circuit guarantees a good arc-ignition and crater filling, and endows the machine with such features as easy to start arc, arc heat concentrated, good gas protection result, etc.
7. In MMA welding, can be used together with all kinds of electrode with a diameter below 0.5mm. In TIG welding, can weld stainless steel, alloy steel, copper, silver, titanium
8. With arc-striking current adjustment switch, can easily adjust the arc-striking current, optimize the arc ignition effect. The pushing current adjustment knob can strengthen the arc force and prevent the welding electrode stuck to workpieces
9. Can be equipped with the distance control box to realize distance control, simplify the operation
10. Can be used in welding the stainless steel parts, pressure container and pipeline, realize TIG grounding and TIG covering once a time, greatly improve the working efficiency
11. A voltage fluctuation of ± 20% is allowable
WS7-315
WS7-400
WS7-500
Power source
3-phase 380V/415V 50Hz
Rated input capacity
12.2KVA
17.3 KVA
23.7 KVA
Rated input current
18.6A
26.3A
36A
Rated welding current
315A
400A
500A
Welding current
315A 60%DE
400A 60%DE
500A 60%DE
250A 100%DE
315A 100%DE
400A 100%DE
Adjustment range of current
20-315A
20-400A
20-500A
Efficiency
83%
No-load voltage
TIG
40-50V
MMA
70-80V
Current up/down-slope time
0-10S
Time for pre-gas sending
1S
Time for delay gas sending
5S
Dimensions (mm)
500×260×360
550×260×360
Weight (Kg)
35
40
55
Air switch
32A
32A
40A
Input cable (mm 2 )
3×4+1×2.5
3×4+1×2.5
3×6+1×4
Insulation class
F
Protection class
IP21
Model NO.: WS7-400
Power: 3-Phase 380V/415V
Trademark: MORROW
Specification: ISO9001
Origin: China
HS Code: 8515319000
Model NO.: WS7-400
Power: 3-Phase 380V/415V
Trademark: MORROW
Specification: ISO9001
Origin: China
HS Code: 8515319000
Features