On the 25th, the Shenzhen Traffic Police will implement the traffic organization mode of the Chaoshan Lane in the morning and evening peaks (7:00 to 9:00, 17:30 to 19:30) on Buji Road, and use the country's first expressway to automate the tidal driveway. Work car.
We offer full set seed processing line solution. Whole seed processing line is from pre-cleaning, fine cleaning, destining, gravity
separating, bean polishing, to seed coating, until seed weighing and packing.
The grain seed processing line is composed of several single machines. Base on different grain type and
processing aim, we will suggest appropriate grain cleaning machines. These grain cleaning machines are
collocated freely. Between each machines, there are bucket elevator, slope
elevator or other conveying equipment to link up.
Seed processing line has following
advantages:
Easy to setup, machines easy
to move and can be placed freely.
Save labor, there are middle
conveyors to transfer grain from one machine to another.
Effective and low cost, single
machines compose a seed processing line improve the working performance. Low
production cost makes it hot sale.
Above flexibility and
convenience makes seed processing line makes it becoming hot sales item.
Seed processing line installation
effect and introduction.
This seed processing line is
composed of 5XZC-5DH seed cleaner & grader, 5XZ-5B Gravity Separator, DTY
bucket elevator, 5BY-5B seed coating machine, and DCS-50B Bagging Scale System.
Working flow: The seeds are
fed into 5XZC-5DH seed cleaner &
grader first. Seed cleaner & grader will remove the dust, light
impurity, oversize and undersize impurity before seed flow into 5XZ-5B gravity separator. During seeds cleaned
in gravity separator, the seeds are separated by density difference. The
partially eaten seeds, immature seeds, insect damaged seed, sick seeds, moldy
seeds are separated from good healthy seeds. Then seeds go on being lifted by DTY Bucket Elevator, falling into the 5BY-5B seed
coating machine. During the seed coating procedure, the chemical,
fertilizer or other protective liquidity will be coated to seeds' surface and
improve seeds' germination rate. Finally seeds being transferred to weighing scale. Seeds will be weighted
and packed to bags ready for sell.
One seed
processing line includes several seed processing machines. It can be composed
of different single machines freely. Base on client's particular cleaning aim,
we will offer customized seed processing line. It is featured of simple
operation, flexible and cost effectively.
Following is one simple seed processing
line case show
This seed cleaning line is 5 ton per hour
capacity. And it consists of 5XZC-5DH seed cleaner & grader, Slope Elevator ,
5XZ-5 gravity separator, and 5XQS-5 destoner.
Working flow:
Raw material is fed from seed cleaner & grader bucket
elevator hopper. Then bucket elevator transfer raw material to air screen
cleaner to remove the light impurity. The dust, straw, husk are removed
here by air suction and collected by cyclone. Then raw material fall into sieve
trunk. The sieve trunk has several layers. Each layer installed different hole
size sieves. These sieves will grade raw material by size. So the oversize
impurity, undersize impurity are removed. Seeds from seed cleaner outlet box
are received by first slope elevator.
This slope elevator transfer seeds to gravity separator. On the gravity table,
the immature, eaten, sicken, moldy, shrink seeds are separated from good seeds.
As the gravity separator will separated seeds to 3 parts: impurity, mixing
seeds, good seeds. The mixing seeds are received by this first slope elevator too. It will take the mixing grain for reflow. The good seeds are being
transferred by second slope elevator to the destoner. The destoner will separate the stones, heavy impurity out.
Finally you get clean grain from the destoner good grain outlet box.
Seed Processing Line,Seed Cleaning Line,Grain Cleaning Line,Sprout Processing Line SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com
With the expansion of the SAR and the rapid development of the city, the problem of separation of employment within and outside the original SAR has gradually intensified. The contradiction between the growth of traffic demand and the shortage of transportation supply has been particularly prominent in the roads near the original second-line customs gate. The Shenzhen Traffic Police specially organized research on the Chaoshan Lane on Buji Road. In November 2015, the morning peak was entered, and the evening peak exited the Chaoshan Lane trial operation. The traffic congestion on Buji Road was significantly alleviated.
Because Buji Road is the main road of the city, the speed of the peak speed is relatively fast, and there are large trucks mixed, and there are some corners on the road. Therefore, it is difficult to adopt the full-light-controlled tidal lane according to the Xinzhou Road and Dongchang Road modes. Referring to the experience of setting up the tidal driveway of the Golden Gate Bridge in the United States, the Shenzhen traffic police began to explore the use of fully automated tidal lane control in the management of the Chaoshan Lane on Buji Road.
The automatic tidal lane facility uses a special control vehicle as the mobile platform. Through the innovative design, the “Sâ€-shaped water horse displacement track is the main feature, and the automatic operation of the water horse displacement system to shift the isolated water horse one lane is achieved. It is a comprehensive system integrating mechanical, electronic, fluid control and vehicle technology. The use of automated tidal lane facilities further enhances the safety and efficiency of the tidal lanes in Shenzhen. With the introduction of relevant equipment, the “automatic tidal lanes†of dynamically allocated lanes will become the conventional means of handling congestion in Shenzhen. 
