Displacement The engine displacement is the sum of the working volumes of each cylinder and is generally expressed in milliliters (cc). The working volume of the cylinder refers to the gas volume swept by the piston from top dead center to bottom dead center. It is also called the single cylinder displacement. It depends on the bore diameter and piston stroke. Engine displacement is one of the most important structural parameters. It is more representative of the size of the engine than the bore diameter and number of cylinders. Many engine indicators are closely related to displacement.
Botuo HT And HB Series Are dedicated to the application of hot water pump While all pumps can handle a certain degree of high temperature, some pumps are specifically designed to withstand the extra high temperature found in some fluid solutions in applications, such as carpet cleaning, boiler feed, hot-water pressure washers and other industrial high temperature applications. These pumps have a flow range up to 7.9GPM (29.89 L/min). Two types of high temperature pumps are available, namely 180 °F (85 °C) versions. In general, many of Botuo`s standard pumps can operate with high temperature fluids, so other possibilities exist beyond those listed in this section.While all pumps can handle a certain degree of high temperature, some pumps are specifically designed to withstand the extra high temperature found in some fluid solutions in applications, such as carpet cleaning, boiler feed, hot-water pressure washers and other industrial high temperature applications. These pumps have a flow range up to 42 GPM (160 L/min). Two types of high temperature pumps are available, namely 1 namely 180 °F (85 °C) versions. In general, many of `s standard pumps can operate with high temperature fluids, so our pump can support a special Applications
hot high temperature ZHEJIANG BOTUOLINI MECHANICAL CO.,LTD , https://www.botuopump.com