Conveyor Bearing is rolling element bearing used in conveyor system. Such as Deep Groove Ball Bearing used in bulk Conveyor Idler Roller , Spherical Roller Bearing and Self-aligning Ball Bearing used in Conveyor Drum Pulley etc. which plays a role of reducing the friction among the components.
Heavy (or bulk) conveyors often endure contaminants and dirty in harsh environment. The most important part of idler roller is bearing. It is unique design deep groove ball Bearing For Conveyor Idler that meet all challenges: extremely different temperatures, low-speed, bulk materials handling, humidity, dust, dirt, as well as noise and vibration environments.
Conveyor Bearing usually need large Clearance such as C3/C4, Reinforce iron retainer or unique nylon retainer(superior anti-static and anti-sticking) and inner/Outer rings, Sealed type, with good anti-sticking performance. While cannot use standard Bearing, they will cause big running resistance, brake and reduce lifetime of bearing.
Main Products:
6200/6300 series deep groove Ball Bearing 6200/6300 series is well suited for low to heavy radial loads and can be configured for various application speeds and running precision requirements. Reinforced iron Retainer, Super-finished deep groove, smooth race, thicker inner and outer ring.6204---6310 6204/C3---6310/C3 6204/C4---6310/C4
6204KA---6308KA 6204KA/C3---6308KA/C3 6204KA/C4---6308KA/C4
6204-2RS---6310-2RS 6204-2RZ---6310-2RZ 180204---180308
60204---60310 6204KA-Z---6308KA-Z 6204TN-Z---6308TN-Z
Spherical Roller Bearings for mining machine, crusher, Conveyor Pulley etc. ultra-harsh environments
Spherical roller Bearing For Conveyor drum pulley
22210 CA/CC /W33---22256 CA/CC /W33 22310 CA/CC /W33---22348 CA/CC /W33
Double-row spherical roller bearings are capable of carrying heavy loads in both radial and axial directions. They are self-aligning, thus compensating for shaft deflections and seat misalignment. Available in a variety of standard and special designs, with cylindrical and tapered bore.
Self-Aligning Ball Bearing for conveyor drum pulley.
Main products are 1308-1316
With more than 10 years of conveyor bearing experience, we can assist you with selecting the appropriate bearings for your system. Welcome to visit our Factory. If you have any questions, please contact with us directly.
Conveyor Bearing Conveyor Bearing,Bulk Conveyor Bearing,Belt Conveyor Bearing,Bearing For Conveyor Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl
As long as it is not too serious, you can solve it yourself. However, one thing to note is that there are some things to pay attention to when disassembling an electronic scale. Otherwise, the problem of repairing an electronic scale that does not have too many failures itself will be more problematic.
The above are the main points to note, only the above points are done, the correct dismantling of the electronic platform. However, it should be reminded here that if serious problems with electronic scales cause problems that cannot be solved by themselves, do not force them to solve them by yourself. Make sure to ask professional and technical personnel to solve them. Otherwise, serious consequences may occur.
1: Disassemble the connecting screws between the two scales, vertical and horizontal; need to pay attention to distinguish.
2: Pack up the steel balls under the scale body, steel balls and steel pads and corresponding thin iron gaskets;
3: In the process of disassembly, we must also pay attention to fastening the corresponding sensor signal line to avoid crushing and breaking. Should avoid the weighing sensor colliding in the process of disassembly and lifting.
4: First of all, make preparations. Prepare some tools required for dismantling the electronic loadometer; if it is not ready to start construction, it is easy to dismantle the process of half-delay, resulting in structural instability and deformation.
5: The signal line of each load cell should be loosened from the junction box, and corresponding records should be made. This is to facilitate the installation in the original position of the junction box in the future installation. Otherwise, if the wrong position is installed, the status of the fault will be severe. The second thing to note is that the fault line must not be cut off, and the main line must be put away and put away;
With the increasing demand for floor scales recently, people are buying more and more electronic floor scales. Many people have always felt that if they encounter a fault, they would love to repair it by themselves. Because, if some minor problems are asked, the technicians who perform professional maintenance may consume more time, and the period of delay will be very long. One is above the funds. Faced with this, if users of electronic scales who are more familiar with weighing instruments, they can completely repair them manually. 
Shanghai Yajin Company specializes in supplying various types of electronic scales, explosion-proof electronic scales, waterproof electronic scales, electronic scales, electronic truck scales, electronic scales forklift scales, electronic table scales, stacker forklifts, hydraulic forklift filling scales, electronic precision balances. , E-day equals domestic and international well-known brand scales. Part of the brand: West special balance, Grace weighbridge, METTLER TOLEDO electronic scales, Prison electronic scales, Cody electronic scales, Teraoka electronic scales, British exhibition electronic scales ,, For the convenience of users, we provide free home delivery, installation, commissioning and repair of various weighing instruments for users in Shanghai. Free service range: 1: 12 months warranty and lifetime maintenance service for the products sold. 2: Free home delivery, installation, commissioning 3: Free consultation service. Interested parties are welcome to call us, we will be happy to serve you, tailor-made recommendations for your most suitable products!