FOUR STROKE, 60HP, EFI OUTBOARD MOTOR Â PARSUNÂ 60HP F60BEL-T Outboard MotorSpecifications * Depending on the models FOUR STROKE, 60HP, EFI OUTBOARD MOTOR Â PARSUNÂ 60HP F60BEL-T Outboard MotorSpecifications * Depending on the models
High-strength strap-Clinching Machine is
Equipped With Lever Devices and Matches with T10 Conveyor Belt Fasteners. With
its reasonable and novel design, excellent performance, accurate location and
the utilization of jointed arms and cams, it is highly efficient in
transmission mechanism. The whole machine can be disassembled into two parts,
which makes it portable. It also has the advantages of good performance, high
precision and long service life.
Belt Riveting Machine,Snap Installation Tool,Fastener Installation Tool,Equipped With Lever Devices Huozhou Coal and Electricity Group Bailong Industry and Trade Co., Ltd. , https://www.hltransportbeltbuckle.com
PARSUN 60HP EFI outboard motor is utmost powerful, silent, fuel-efficient and reliable. Â It is an ideal outboard for fishing boats. Â Its single overhead camshaft (SOHC) and eight valves aim for maximum power and efficiency.
Â
New streamlining top cowling
PARSUN 60HP outboard motor has a new cowling design with an optimized intake air drain system, which can easily drain the water entering the top cowling during normal engine operation.
Â
Integral engine monitoring and warning system
Several different sensors continuously monitor the engine's critical functions. Â They will send out special signals to inform you in advance, such as Over-Rev Limiter, Over-Heat Warning, Start-in-Gear Protection, Lower Oil Pressure Warning, and automatically reduce the engine power to prevent damage.
Â
Multi-point electronic fuel injection with ECM control to deliver the precise fuel / air mixture for optimum combustion and provide smooth running
PARSUN four stroke 60HP EFI engine is controlled by the ECM unit, which ensures the precise amount of air necessary for optimum power and fuel efficiency.  The air enters each cylinder through individual long intake manifold, helping to provide air at the precise volume and timing for maximum density and power. The four electronic fuel injectors deliver the exact amount of fuel to get the best optimum performance and economy.
Â
Several special control sensors for EFI system to get the optimum engine performance
Crank Position Sensor
Throttle Position Sensor
Intake Air Pressure Sensor
Oil Pressure Sensor
Cooling Water Pressure Sensor
Intake Air Temperature Sensor
Cooling Water Temperature Sensor
Â
Fuel-water separator and fuel filter
F60 outboard motor is equipped with boat-mounted water separating fuel filter, preventing any debris or water in the fuel from getting into the engine.
Optimized engine emission
Blow-by-gas re-burning system and labyrinth exhaust help to get the better emission and lower noise. F60 outboard motor meets both CE and EPA Emission Standards.
Â
Ultimate corrosion protection system
Highly anti-corrosive paint system provides a five-layer painting against corrosion. Stainless steel components such as the drive shaft, propeller shaft and shifting shaft, provide the critical corrosion protection. Â Multiple sacrificial anodes throughout the motor provide protection from the elements.
Â
Ultimate convenience in operation
1. Built-in freshwater flushing system provides easy routine flushing.
2. High output 18 amp alternator facilitates battery charging and fishing electronics.
3. Power trim & tilt or hydraulic system makes the engine operating more easily.
4. Magnetic drain plug for replacing oil easily.
5. Engine RPM meter, boat speed meter, battery voltage meter and tilt & trim angle meter are available at option.
6. Reliable Delphi E.F.I. multifunction diagnostic scanner (available at option).
Â
ITEM
F60 FEL-T
Engine type
4-stroke,4-cylinders,8-valve,SOHC
Displacement
996cc
Bore x stroke mm(in.)
65.0×75.0(2.56×2.95)
Idling engine speed(rpm)
750 ~ 850
Full throttle RPM range
5000 ~ 6000
Max output KW(HP)@ r/min
44.1(60)@5500
Fuel induction system
Electric fuel injection
Ignition system
Micro computer
Starting system
Electric (Turn-key)
Alternator output
12V DC / 18amp
Steering system
Remote controlÂ
Gear shift
Forward-Neutral-Reverse
Gear ratio
1.85(24/13)
Trim and tilt system
Power trim & tilt
Shaft length
508mm (20 in.)Â
Max fuel consumption
20 L/h
Fuel tank capacity
24L
Sump oil capacity
2.5L
Gear oil capacity
430cc
Dry weight
110kg
*Propeller choice will vary by boat size and application.
*B=Back control(Tiller control), M=Manual start, S=Short shaft, L=Long shaft, W=Electric start+Manual start, F=Front control(Remote control),T=Electric tilt
PARSUN 60HP EFI outboard motor is utmost powerful, silent, fuel-efficient and reliable. Â It is an ideal outboard for fishing boats. Â Its single overhead camshaft (SOHC) and eight valves aim for maximum power and efficiency.
Â
New streamlining top cowling
PARSUN 60HP outboard motor has a new cowling design with an optimized intake air drain system, which can easily drain the water entering the top cowling during normal engine operation.
Â
Integral engine monitoring and warning system
Several different sensors continuously monitor the engine's critical functions. Â They will send out special signals to inform you in advance, such as Over-Rev Limiter, Over-Heat Warning, Start-in-Gear Protection, Lower Oil Pressure Warning, and automatically reduce the engine power to prevent damage.
Â
Multi-point electronic fuel injection with ECM control to deliver the precise fuel / air mixture for optimum combustion and provide smooth running
PARSUN four stroke 60HP EFI engine is controlled by the ECM unit, which ensures the precise amount of air necessary for optimum power and fuel efficiency.  The air enters each cylinder through individual long intake manifold, helping to provide air at the precise volume and timing for maximum density and power. The four electronic fuel injectors deliver the exact amount of fuel to get the best optimum performance and economy.
Â
Several special control sensors for EFI system to get the optimum engine performance
Crank Position Sensor
Throttle Position Sensor
Intake Air Pressure Sensor
Oil Pressure Sensor
Cooling Water Pressure Sensor
Intake Air Temperature Sensor
Cooling Water Temperature Sensor
Â
Fuel-water separator and fuel filter
F60 outboard motor is equipped with boat-mounted water separating fuel filter, preventing any debris or water in the fuel from getting into the engine.
Optimized engine emission
Blow-by-gas re-burning system and labyrinth exhaust help to get the better emission and lower noise. F60 outboard motor meets both CE and EPA Emission Standards.
Â
Ultimate corrosion protection system
Highly anti-corrosive paint system provides a five-layer painting against corrosion. Stainless steel components such as the drive shaft, propeller shaft and shifting shaft, provide the critical corrosion protection. Â Multiple sacrificial anodes throughout the motor provide protection from the elements.
Â
Ultimate convenience in operation
1. Built-in freshwater flushing system provides easy routine flushing.
2. High output 18 amp alternator facilitates battery charging and fishing electronics.
3. Power trim & tilt or hydraulic system makes the engine operating more easily.
4. Magnetic drain plug for replacing oil easily.
5. Engine RPM meter, boat speed meter, battery voltage meter and tilt & trim angle meter are available at option.
6. Reliable Delphi E.F.I. multifunction diagnostic scanner (available at option).
Â
ITEM
F60 FEL-T
Engine type
4-stroke,4-cylinders,8-valve,SOHC
Displacement
996cc
Bore x stroke mm(in.)
65.0×75.0(2.56×2.95)
Idling engine speed(rpm)
750 ~ 850
Full throttle RPM range
5000 ~ 6000
Max output KW(HP)@ r/min
44.1(60)@5500
Fuel induction system
Electric fuel injection
Ignition system
Micro computer
Starting system
Electric (Turn-key)
Alternator output
12V DC / 18amp
Steering system
Remote controlÂ
Gear shift
Forward-Neutral-Reverse
Gear ratio
1.85(24/13)
Trim and tilt system
Power trim & tilt
Shaft length
508mm (20 in.)Â
Max fuel consumption
20 L/h
Fuel tank capacity
24L
Sump oil capacity
2.5L
Gear oil capacity
430cc
Dry weight
110kg
*Propeller choice will vary by boat size and application.
*B=Back control(Tiller control), M=Manual start, S=Short shaft, L=Long shaft, W=Electric start+Manual start, F=Front control(Remote control),T=Electric tilt
Engine Type: 4-Stroke, 8-Valve, Sohc
Fuel Induction System: Electric Fuel Injection
Ignition System: Micro Computer
Starting System: Electric(Turn-Key)
Max. Fuel Consumption: 20L/H
Sump Oil Capacity: 2.5L
Gear Ratio: 1.85(24/13)
Trim and Tilt System: Remote Control
Gear Oil Capacity: 430cc
Dry Weight: 110kg
Trademark: PARSUN
Transport Package: Iron Frame and Carton
Origin: China
HS Code: 84072100
Engine Type: 4-Stroke, 8-Valve, Sohc
Fuel Induction System: Electric Fuel Injection
Ignition System: Micro Computer
Starting System: Electric(Turn-Key)
Max. Fuel Consumption: 20L/H
Sump Oil Capacity: 2.5L
Gear Ratio: 1.85(24/13)
Trim and Tilt System: Remote Control
Gear Oil Capacity: 430cc
Dry Weight: 110kg
Trademark: PARSUN
Transport Package: Iron Frame and Carton
Origin: China
HS Code: 84072100