Light Immersible Vertical Multi-Stage Centrifugal Pump Crk

Immersion Multi stage Centrifugal Pump

Introduction                                                        
CRK is a kind of multifunctional products. It can be used to convey various medium from tap water to industrial liquid at different temperature and with different flow rate and pressure. CRK type is applicable to conveying non-corrosive liquid, While CRK is suitable for slightly corrosive liquid. 
Water supply  Water filter and transport in Waterworks, boosting of main pipeline, boosting in high-rise buildings. 
Industrial boosting: Process flow water system,cleaning system, high-pressure washing system, fire fighting system Industrial liquid conveying:Cooling and air-conditioning system, boiler water supply and condensing system, machine-associated purpose, acids and alkali 
Water treatment: Ultrafiltration system, reverse osmosis system, distillation system, swimming pool, separator Irrigation: Farmland irrigation, spray irrigation, dripping irrigation.
 

Application 
CRK is used for conveying cooling liquid,lubricating liquid and condensation water of machine tools,industrial cleaning equipment or other cases that application of immerged pump is suitable,and is applicable to various temperature,flow and pressure ranges.CRK is applicable to low-corrosive liquid. 
Concretely,it is applicable to electric spark.,lathe,grinding machine,processing center,cooling devices,industrial cleaning equipment,filtering system etc. 
Operation conditions 
Thin,clean non-explosive liquid without solid grains and fibers;can be used for conveying of water,cooling water solution and cutting lubricating liquid. 
Liquid temperature:Normal temperature type :-15~+70 
Warm water type +70~120 
Pump 
CRK is non-self priming multi-stage centrifugal pump installed with standard motor.The motor shaft is directly connected with the pump shaft through
coupling.According to the requirement,the pump can be equipped with intelligent protector,which effectively protects pump from dry rotation,phase lack,overload etc.In order to meet the requirement of installation depth of the water tank or vessel,it is possible to install cavity body for changing length of the pump.Length for different number of stages is shown in the dimensions & weight table and the table of products supplying scope. 
Motor 
The motor is fully-sealed,air cooling standard motor 2 poles 
Protection class:IP55 
Insulation class:F 
Standard voltage,50HZ:1×220230/240V
3×200/346V
3×220240/380415V
3×220225/380440V 
Motors for other voltages can be supplied according to the requirement.
Single phase motors with 0.37~2.2KW are available.

Product details:

Performance curve: 
Following conditions are suitable for the performance curves shown bellow:
1. All curves are based on the measured values of 50Hz: Constant motor speed 2900rpm or 2950rpm
2. Curve tolerance in conformity with ISO9906 Annex A.
3. Measurement is done with 20C air-free water, kinematic viscosity of 1mm ²/sec.
4. The operation of pump shall refer to the performance region indicately by the thickned curve to prevent overheating due to too small flow rate or overload of motor due to too large flow rate.

Section drawing CRK2:


 Section drawing CRK4:


 Section drawing CRK8:

Section drawing CRK12:

Also we have CRK20 ,if you need ,you can contact us 
Packing


we can supply the detail drawing if you need ,

 Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade service.

Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. but they're unfree.

Question 3: Where is your factory located? How can I visit there? 
Answer: Our factory is located in Ningbo, China. You can fly to Ningbo or Shanghai airport directly. All our clients, from home or abroad, are warmly welcome to visit us!

Question 4: How does your factory do regarding quality control? 
Answer: Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001 authentication.

Question 5: How about the lead time?
Answer: Within10-50 days after getting the prepayment.
Question 6: How can we pay?
Answer: For small sample shipping cost, you can pay either by paypal or by T/T. And by T/T at sight for large amount of the order.
 
Question 7: If OEM available?
Answer: Yes, we provide all of our products OEM /ODM service.

Immersion Multi stage Centrifugal Pump

Introduction                                                        
CRK is a kind of multifunctional products. It can be used to convey various medium from tap water to industrial liquid at different temperature and with different flow rate and pressure. CRK type is applicable to conveying non-corrosive liquid, While CRK is suitable for slightly corrosive liquid. 
Water supply  Water filter and transport in Waterworks, boosting of main pipeline, boosting in high-rise buildings. 
Industrial boosting: Process flow water system,cleaning system, high-pressure washing system, fire fighting system Industrial liquid conveying:Cooling and air-conditioning system, boiler water supply and condensing system, machine-associated purpose, acids and alkali 
Water treatment: Ultrafiltration system, reverse osmosis system, distillation system, swimming pool, separator Irrigation: Farmland irrigation, spray irrigation, dripping irrigation.
 

Application 
CRK is used for conveying cooling liquid,lubricating liquid and condensation water of machine tools,industrial cleaning equipment or other cases that application of immerged pump is suitable,and is applicable to various temperature,flow and pressure ranges.CRK is applicable to low-corrosive liquid. 
Concretely,it is applicable to electric spark.,lathe,grinding machine,processing center,cooling devices,industrial cleaning equipment,filtering system etc. 
Operation conditions 
Thin,clean non-explosive liquid without solid grains and fibers;can be used for conveying of water,cooling water solution and cutting lubricating liquid. 
Liquid temperature:Normal temperature type :-15~+70 
Warm water type +70~120 
Pump 
CRK is non-self priming multi-stage centrifugal pump installed with standard motor.The motor shaft is directly connected with the pump shaft through
coupling.According to the requirement,the pump can be equipped with intelligent protector,which effectively protects pump from dry rotation,phase lack,overload etc.In order to meet the requirement of installation depth of the water tank or vessel,it is possible to install cavity body for changing length of the pump.Length for different number of stages is shown in the dimensions & weight table and the table of products supplying scope. 
Motor 
The motor is fully-sealed,air cooling standard motor 2 poles 
Protection class:IP55 
Insulation class:F 
Standard voltage,50HZ:1×220230/240V
3×200/346V
3×220240/380415V
3×220225/380440V 
Motors for other voltages can be supplied according to the requirement.
Single phase motors with 0.37~2.2KW are available.

Product details:

Performance curve: 
Following conditions are suitable for the performance curves shown bellow:
1. All curves are based on the measured values of 50Hz: Constant motor speed 2900rpm or 2950rpm
2. Curve tolerance in conformity with ISO9906 Annex A.
3. Measurement is done with 20C air-free water, kinematic viscosity of 1mm ²/sec.
4. The operation of pump shall refer to the performance region indicately by the thickned curve to prevent overheating due to too small flow rate or overload of motor due to too large flow rate.

Section drawing CRK2:


 Section drawing CRK4:


 Section drawing CRK8:

Section drawing CRK12:

Also we have CRK20 ,if you need ,you can contact us 
Packing


we can supply the detail drawing if you need ,

 Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade service.

Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. but they're unfree.

Question 3: Where is your factory located? How can I visit there? 
Answer: Our factory is located in Ningbo, China. You can fly to Ningbo or Shanghai airport directly. All our clients, from home or abroad, are warmly welcome to visit us!

Question 4: How does your factory do regarding quality control? 
Answer: Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001 authentication.

Question 5: How about the lead time?
Answer: Within10-50 days after getting the prepayment.
Question 6: How can we pay?
Answer: For small sample shipping cost, you can pay either by paypal or by T/T. And by T/T at sight for large amount of the order.
 
Question 7: If OEM available?
Answer: Yes, we provide all of our products OEM /ODM service.

Diesel High Pressure Washer

Diesel Pressure Washer,Diesel High Pressure Washer,Industrial Diesel Pressure Washer,Industrial Diesel High Pressure Washer

Taizhou Chendi Electromechanical Co., Ltd. , https://www.chinachendi.com