Low Noise Automatic Control Cable Wire Granulator

1. Wires and cables are fed into the crusher, where they are broken down, and the plastic sheath is separated from the copper. The size of the crushed material depends on the mesh size of the screen—larger mesh results in longer pieces and higher output. Choose the mesh size based on the type of wire being processed.
2. The resulting mixture of copper granules and plastic pieces is transported to the separator via a conveyor. During this step, dust and lightweight plastics (such as fibers, ropes, or tapes) are collected by the pressure-reducing blower. The dust collector uses a dust collection bag to prevent environmental pollution, and the collected dust and light plastic are discharged when the bag is full.
3. The vibrating separator is used to separate copper granules and plastic pieces. Based on differences in physical properties and specific gravity, the materials move differently under aerodynamic and vibration forces. By adjusting the speed and amplitude, heavier copper granules move downward, while lighter plastic particles move upward, and both are discharged through separate outlets.
4. All units are mounted on a base frame, forming a compact system. The machine is pre-adjusted before shipping, so customers only need to connect it to a power supply to start production.

Automatic Control Cable Wire Granulator Technical Parameters: 

ModelÂ	Recycling capacity	Processed wire dia.	Total power	Voltage	DimensionÂ	WeightÂ
QJF-400-1	80-100kg/h	    0.3-20mm	11.92KW	    Adjustable	1.5*1.5*1.9m	750kg
QJF-400	200-300kg/h		23.12KW		2.7*1.9*2.3m	1200kg
QJF-600A	300-400kg/h		48.36KW		4*1.85*2.4m	3400kg
QJF-600	300-400kg/h		52.36KW		4.3*1.95*2.4m	3400kg
QJF-800	600-700kg/h	0.1-40mm	75.4KW		9.1*2.3*3.54m	8000kg

   
Automatic Control Cable Wire Granulator Different Models:  




FAQ 
 1. Is there quick-wear part on the machine? 
The spare parts include blades and screens, which have a service life of over two years. We also provide a blade sharpening machine for maintenance.
 2. What's the longest continuous working time for the recycling machine?   
Normally 10 hours per day. 
 3. Is the machine easy to operate? How many workers required to operate it? 
We design a precise yet simple control system for the machine.
For a single recycling machine, one worker is sufficient.
For a complete recycling line, two workers are needed.

Contact information:  
Attn: Tina Ge 
Mobile +86 159 8192 5357 
 
 

Replacement Filter Elements

It is very important for element design and material.

Element Struction

FPM seal ring ensure the air-tightness between filter head and filter element, to achieve a positive filtration Effect.

Double stainless steel support layer to ensure the fulter element strength, deep bed Multi-wrap borosilicate glass microfibre large flow passage prevent high pressure drop.

With 96% porosity high dirt holding capacity, lifespan up to 6000 to 8000 hours. The general differential pressure is 0.17~0.25 kg/cm, less than 0.65kg/cm.

The element cover is made of PA+GF, free from deformation at 1.8Mpa pressure and high temperature of 240℃ and capable of resisting general acid and alkali chemical corrosion and withstanding the severe compressed air environment.

Special material for the outer layer of filter element, with strong hydrophobic and oilphobic, prevent the oil or water being blown away and received drying and filtering effect.

Industrial Water Filter Cartridge,Compressed Air Filter Element,Activated Carbon Filter Cartridge

Hongrijia Depurate Facility Science & Technology Co.,Ltd. , https://www.yukafilter.com