2017 Brand New Copper Wire Granulator for Sale

1. Copper wires and cables are fed into the crusher where they are broken down, and the plastic sheath is separated from the copper. The size of the crushed material depends on the mesh size of the screen; larger meshes result in longer pieces and higher output. The appropriate mesh size should be selected based on the type of material being processed.
2. The crushed material (a mix of copper granules and plastic pieces) is transported to the separator via a conveyor. During this process, dust and lightweight plastic fragments (such as fibers, ropes, or tapes) are collected by the pressure-reducing blower. The blower is connected to a dust collector with a dust collection bag that prevents dust emissions, ensuring environmental protection. When the bag is full, the collected dust and plastic fragments are removed.
3. The separator is used to separate plastic pieces and copper granules based on differences in physical properties and specific gravity. By adjusting the speed of the conveyor and vibration amplitude, copper granules (with higher specific gravity) move to the bottom and upward, while lighter plastic pieces move to the top and downward, eventually being discharged through separate outlets.
4. All components are mounted on a base structure, forming a complete unit. The machine is pre-adjusted before shipping, so customers only need to connect it to a power source to start production.

Technical Parameters: 

ModelÂ	Recycling capacity	Processed wire dia.	Total power	Voltage	DimensionÂ	WeightÂ
QJF-400-1	80-100kg/h	    0.3-20mm	11.92KW	    Adjustable	1.5*1.5*1.9m	750kg
QJF-400	200-300kg/h		23.12KW		2.7*1.9*2.3m	1200kg
QJF-600A	300-400kg/h		48.36KW		4*1.85*2.4m	3400kg
QJF-600	300-400kg/h		52.36KW		4.3*1.95*2.4m	3400kg
QJF-800	600-700kg/h	0.1-40mm	75.4KW		9.1*2.3*3.54m	8000kg

   
Different Models:  




FAQ 
 1. Are there any quick-wear parts on the machine? 
The main wear parts are the blades and screens, which can last over 2 years. We also provide blade sharpening machines for maintenance.
2. What is the maximum continuous working time for the recycling machine?   
Typically, it can run for up to 10 hours per day.
3. Is the machine easy to operate? How many workers are needed?
We have designed a simple yet precise control system. For a single unit, one worker is sufficient. For a full recycling line, two workers are required.



 
 

Anti-wear Ring

Installation and precautions of track connecting rod oil seal
The installation steps for the track link oil seal are as follows:
1. Cleaning: Clean the connecting parts to ensure that the surface is flat, clean, and free of grease and dirt.
2. Oil application: Apply a layer of lubricating oil to the connecting parts for better installation.
3. Installation: Gently push the oil seal into the connection area to ensure that the lip of the oil seal is not damaged.
4. Positioning: After positioning the oil seal, press it with your fingers to ensure it is in the correct position.
5. Inspection: Check if the oil seal is installed correctly and ensure that the lip is not damaged.
The precautions are as follows:
Before installation, check if the oil seal is damaged. If the oil seal is damaged, replace it with a new one.
Before installation, ensure that the surface of the connecting parts is flat, clean, and free of grease and dirt.
3. When installing the oil seal, gently push in to avoid damaging the lip of the oil seal.
4. After installation, check whether the oil seal is installed correctly to ensure that the lip is not damaged.
5. During use, the condition of the oil seal should be regularly checked. If any damage or wear is found, the oil seal should be replaced in a timely manner.

Wear ring for excavator,For excavator track,For excavator accessories

Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com