Model NO.: VS-04
Refrigerant Type: Freon
Warranty: One Year
Controlled by: PLC
Power: 220V, 380V 50Hz, 60Hz
Capacity: 2.0m³/Min, 2000L/Min, 72cfm/Min
Trademark: Veshine
Transport Package: Wooden Case
Specification: 2750*1750*1900mm
Origin: Zhangjiagang, China
HS Code: 8414809090
Model NO.: VS-04
Refrigerant Type: Freon
Warranty: One Year
Controlled by: PLC
Power: 220V, 380V 50Hz, 60Hz
Capacity: 2.0m³/Min, 2000L/Min, 72cfm/Min
Trademark: Veshine
Transport Package: Wooden Case
Specification: 2750*1750*1900mm
Origin: Zhangjiagang, China
HS Code: 8414809090
Air Compressor:
We can support combinatorial compressor in one plate to ensure customer fit and use very easily.Temperature control and intelligent systems to ensure that the device temperature protection.
Introduction:
The air compressor is the main body in the air supply device, which is the means for converting the mechanical energy of the prime mover (usually the motor) into the gas pressure energy, and is the air pressure generating device of the compressed air.
(1)Our air system is combined air cooling high pressure air system. It is easy for customers to set and use with out any base. What customer only to do is only connect the electric to the system,, then it can run. 
(2)Our combined air system can economize the electric. For example, if your blow machine production line is in half producing, then the air system will work half by half, then the exact using electric will be only half of the whole system. And if your blow machine production line works fully, the air system will work fully to ensure the air support for blow machine too.
   Usually, blow machine customers will blow different size bottles, and the air system will be prepared for the largest bottles request. For example, if customers' blow machine will blow 2L bottles, it maybe need 400cfm high pressure air, and if blow 1L bottles, it maybe need 300 cfm high pressure air. In this case, our air system will work according to the request from blow machine production line automatically. Then if customers' production line needs 400cfm, we will support 400cfm, and if customers' production line need 300cfm, we will only support 300cfm too, that will reduce many electric cost for customers per year. And it can protect and prolong the life of air compressors. In your word, we can design our system in Variable Speed Drive. 
(3) Our system will be easily use and maintained with low price cost. The maintains for our air compressor in only to change oil, air filter, piston ring, valve plate, these are cheap. It does not need Cooling Water Systems. The maintains for water cooler air compressor will be very expensive and complicated, and it needs much time to have maintains. Air cooling air compressor can be maintained by customer yourself, and it only need half day or one day to finish all maintains. But water cooler air system will need special engineers to maintain.

Features:
Two-cylinder compressor ,In"V"Frame arrangement, Air cooled,single effect,two-stage compression,fitted with:
1.Intake removable filter,with silencer;
2.Normal inertia flywheel,for V belts transmission;
3.Splashing lubrication to all moving parts;
4.Light alloy pistons,with ptfe based segments;
5.Cylinder heads,with indibidual valve pockets;
6.Hoerbiger type automatic valves,big flow area,operating much below their nominal characteristics;
7.SKF main ball bearing on the end of the crankshaft;
8.Two chamber blocks between casing and cylinders.Cylinder side chamber is large enough to avoid the piston rod part in contact with the mechanical element could get in contact with the packing;
9.Air-cooled aftercooler,furnished with safety valve.

Specification:
Air Compressor Specification
Description Unit Technical Data
Air Discharge M3/min 1.6
Discharge Pressure Mpa 3.0
Level of Compression   Three Stage
Motor Power KW/HP 18.5
Rotate Speed R.P.M 800
Mode of Pressure Adjusting   Electronical Adjustment
Size(Length,Width,Height) R.P.M 1500x1130x2000
Weight Kg 650

Details:
Professional Manufacturer of Direct Driven Rotary Screw Air Compressor

If you are interested in our air compressor,Welcome to our factory.Please contact :
Miss Amy
Phone/Whatsapp/IMO:+86 17751206107
 
Website:www.veshine.com Air Compressor:
We can support combinatorial compressor in one plate to ensure customer fit and use very easily.Temperature control and intelligent systems to ensure that the device temperature protection.
Introduction:
The air compressor is the main body in the air supply device, which is the means for converting the mechanical energy of the prime mover (usually the motor) into the gas pressure energy, and is the air pressure generating device of the compressed air.
(1)Our air system is combined air cooling high pressure air system. It is easy for customers to set and use with out any base. What customer only to do is only connect the electric to the system,, then it can run. 
(2)Our combined air system can economize the electric. For example, if your blow machine production line is in half producing, then the air system will work half by half, then the exact using electric will be only half of the whole system. And if your blow machine production line works fully, the air system will work fully to ensure the air support for blow machine too.
   Usually, blow machine customers will blow different size bottles, and the air system will be prepared for the largest bottles request. For example, if customers' blow machine will blow 2L bottles, it maybe need 400cfm high pressure air, and if blow 1L bottles, it maybe need 300 cfm high pressure air. In this case, our air system will work according to the request from blow machine production line automatically. Then if customers' production line needs 400cfm, we will support 400cfm, and if customers' production line need 300cfm, we will only support 300cfm too, that will reduce many electric cost for customers per year. And it can protect and prolong the life of air compressors. In your word, we can design our system in Variable Speed Drive. 
(3) Our system will be easily use and maintained with low price cost. The maintains for our air compressor in only to change oil, air filter, piston ring, valve plate, these are cheap. It does not need Cooling Water Systems. The maintains for water cooler air compressor will be very expensive and complicated, and it needs much time to have maintains. Air cooling air compressor can be maintained by customer yourself, and it only need half day or one day to finish all maintains. But water cooler air system will need special engineers to maintain.

Features:
Two-cylinder compressor ,In"V"Frame arrangement, Air cooled,single effect,two-stage compression,fitted with:
1.Intake removable filter,with silencer;
2.Normal inertia flywheel,for V belts transmission;
3.Splashing lubrication to all moving parts;
4.Light alloy pistons,with ptfe based segments;
5.Cylinder heads,with indibidual valve pockets;
6.Hoerbiger type automatic valves,big flow area,operating much below their nominal characteristics;
7.SKF main ball bearing on the end of the crankshaft;
8.Two chamber blocks between casing and cylinders.Cylinder side chamber is large enough to avoid the piston rod part in contact with the mechanical element could get in contact with the packing;
9.Air-cooled aftercooler,furnished with safety valve.

Specification:
Air Compressor Specification
Description Unit Technical Data
Air Discharge M3/min 1.6
Discharge Pressure Mpa 3.0
Level of Compression   Three Stage
Motor Power KW/HP 18.5
Rotate Speed R.P.M 800
Mode of Pressure Adjusting   Electronical Adjustment
Size(Length,Width,Height) R.P.M 1500x1130x2000
Weight Kg 650

Details:
Professional Manufacturer of Direct Driven Rotary Screw Air Compressor

If you are interested in our air compressor,Welcome to our factory.Please contact :
Miss Amy
Phone/Whatsapp/IMO:+86 17751206107
 
Website:www.veshine.com

For check valves smaller than 2"(DN50), forged steel valves are introduced. Compared with castings, forged valve bodies offer the advantages of more uniform structure, greater density, higher strength integrity, enhanced dimensional characteristics and closer dimensional tolerances.


The design of forged steel check valves are also various: Swing disc / piston disc, full port, conventional port; bolt bonnet, welded bonnet and pressure seal bonnet; socket weld (SW), threaded, butt welded (BW) and flanged end. 

Forged Steel Check Valve

Forged Steel Check Valve, Forged Check Valve Manufacturer, Non-return Valve, Steel Check Valve Supplier, Forged Steel Valve Manufacturer, Stainless Steel Check Valve

Wenzhou Kolink Valve Co., Ltd. , http://www.kolinkvalves.com