Model NO.: DMF-1
Measuring Media: Liquid
Measuring Principle: Atomic Physics
Certification: JIS, DIN, ANS, GB, CE, UL, RoHS, ISO
Measurement Scope: 2kg/H~500t/H
Work Pressure: 0~32MPa
Medium Temperature: -50º C~ +350º C
Output Signal: 4-20mA Current Signal of Flow, with Load Resistanc
Power Supply: 24VDC
Explosion-Proof Grade: Ex(Ib)II Bt2-T5
Response Time: 0.1s~5s, Adjustable
Warranty Period: 1year
Export Markets: Global
Trademark: U-ideal
Transport Package: Wooden Case or Carton
Specification: ANSI JIP DIN JS and others
Origin: Tianjin, China
HS Code: 90261000

Introduction 

UCMF-1-Series Coriolis Mass Flow Meters' measuring principle is based on the controlled generation of Coriolis forces. The measurement would not be affected by the pressure, temperature, viscosity, density, etc. And the compensation calculation is not required. The structure contains two parts: Sensor & Transmitter. The Coriolis Mass Flow Meters are designed and manufactured based on the national standard of safe explosion proof. The Explosion- proof standard is EX d ib II C T5 Gb.
 
The mass flow meter does not measure the volume per unit time (e.g., cubic meters per second) passing through the device; it measures the mass per unit time  (e.g., kilograms per second) flowing through the device. The accuracy of the Coriolis Mass Flow Meters is ±0.1%~ ±0.2%. The application range is large. (It could be used to measure all sorts of all sorts non-newtonian fluid, slurry, suspensions, high viscosity fluid, etc.) The requirements for the installation are low. (The straight pipe requirements in front of and behind the Coriolis Mass Flow Meters are low.) They are more reliable, stable, and the maintenance level is low.

Technical Parameters

 
Applications 		Suitable for Liquid, Gas, Liquid- Solid, Gas- Solid, Liquid- Gas Mass Measurement or volume measurement
Material of the Measurement Pipeline SS 316L/ HC Hastelloy
Pressure Please refer to the chart shown above. Special orders would be placed for high pressure.
 
Medium Temperature 		-50ºC~+150ºC; (Highest Temperature: +350ºC;
Lowest Temperature: -300ºC could be special ordered.)
Environment Temperature Sensor:-40ºC~+150ºC; Transmitter:-20ºC~
+70ºC
Flow Rate Measurement Accuracy ± 0.2% ,± 0.1% optional
Density Measurement Accuracy ±0.002g/cm³,±0.001g/cm³ optional
Repeatability ±0.10% Flow Rate ±[½(Zero Point Stability/Flow Rate)×100]% Flow Rate
 
Output Signal 		4~20mA   Load Resistance <500Ω(Instantaneous
or Density optional); 0~10kHz Instantaneous Flow Rate Pulse Signal; Standard RS 485 Communication
Explosion- Proof Symbol EX d ib   II C T5 Gb

Model selection
Micro Flow Meter- DMF-1-1; DMF-1-2
 

Model		 DN Measurement scope ( kg/h ) Work Pressure  ( MPa ) Connection type (mm)
DMF-1-1-AB 1.5 0~4 0~32 Weld Joints Φ6×1.5
DMF-1-1-A 3 0~40 0~32 Weld Joints Φ6×1.5
DMF-1-1-B 6 0~100 0~25 Weld Joints Φ10×2
DMF-1-2-A 8 0~200 0~20 Weld Joints Φ10×1
 
Medium-Small Flow Meter: DMF-1-3; DMF-1-4; DMF-1-5-A
                                                                 
 
Model 		 
DN 		Measurement scope (kg/h) Work Pressure (MPa)  
Connection Type(mm)
DMF-1-3-A 10 0~500 0~25 Weld Joints Φ20×4
DMF-1-3-B 15 0~1000 0~25 Weld Joints Φ20×3
DMF-1-4 20 0~3000 0~25 Weld Joints Φ20×2
DMF-1-5-A 25 0~10000 0~25 Weld Joints Φ31×3
             
Large-scale Flow Meter: DMF-1-3; DMF-1-4; DMF-1-5; DMF-1-6
 
High pressure could be special ordered. (4~70MPa)
 
 
Model 		 
DN 		Measurement scope (t/h) Work Pressure (MPa)  
Connection Type(mm)
DMF-1-3-A 10 0-0.5 0~4 Flange 10
DMF-1-3-B 15 0-1.0 0~4 Flange 15
DMF-1-4 20 0-3.0 0~4 Flange 20
DMF-1-5-A 25 0-10 0~1.6 Flange 25
DMF-1-5-B 40 0-20 0~1.6 Flange 40
DMF-1-6-A 50 0-30 0~1.6 Flange 50
DMF-1-6-AB 65 0-50 0~1.6 Flange 65
DMF-1-6-B 80 0-100 0~1.6 Flange 80
DMF-1-6-C 100 0-150 0~1.6 Flange 100
DMF-1-6-CD 125 0-200 0~1.6 Flange 125
DMF-1-6-D 150 0-300 0~1.6 Flange 150
DMF-1-6-E 200 0-500 0~1.6 Flange 150

If the above model is not satisfying, please check the following:
 

Model 		Nominal Size (mm)  
Flow rate (kg/hr) 		Stability zero, kg/h Rated Pressure (MPa) NW (KG)  
GW (KG)
0.2% 0.15% 0.1%
UICMF-003 3 0~96~120 0.018 0.012 0.012 40 8 19
UICMF-006 6 0~540~660 0.099 0.066 0.066 20 12 22
UICMF-008 8 0~960~1200 0.18 0.12 0.12 20 12 23
UICMF-010 10 0~1500~1800 0.27 0.18 0.18 20 11 24
UICMF-015 15 0~3000~4200 0.63 0.42 0.42 20 12 25
UICMF-020 20 0~6000~7800 1.17 0.78 0.78 16 20 34
UICMF-025 25 0~10200~13500 2.025 1.35 1.35 16 21 35
UICMF-032 32 0~18 000~24 000 3.6 2.4 2.4 16 27 45
UICMF-040 40 0~30 000~36 000 5.4 3.6 3.6 12 35 55
UICMF-050 50 0~48 000~60 000 9 6 6 12 40 60
UICMF-080 80 0~120 000~160 000 24 16 16 8 90 150
UICMF-100 100 0~222 000~270 000 40.5 27 27 8 170 245
UICMF-150 150 0~480 000~600 000 90 60 60 6 255 360

 

Nide produces a full range of rotor production machine . It can be customized as per different requirement. This rotor manufacturing assembly line including: Shaft pressing machine, End Cover Pressing Machine , Commutator Pressing Machine, armature Insulation Paper Inserting Machine, Armature Winding Machine , Commutator Hot Stacking Machine, armature Wedge Inserting Machine and Armature Testing Machine , Ball Bearing inserting machine, and worm shaft inserting, All the process will be done by machine. Operator only needs to do loading and unloading.

Armature Manufacturing Machine

Armature Manufacturing Machine, Armature Production Line, Armature Winding Machine, armature assembly line, rotor assembly line, rotor production machine, rotor manufacturing machine

Ningbo Nide Mechanical Equipment Co., Ltd. , http://www.nide-auto.com