Standard  ISO9001, GB, BV    Material  Gray iron 200, 250, 300, 350, 400  Ductile iron 400, 500, 700   Size&Design  As per client's drawings and requirements   Weight range  The maximum single piece weights 80 MT     Maching  CNC Milling machine, Machine center, Vertical lathe,  Digital floor boring and milling machine, Drill machine,  etc.    Testing  Direct-reading analyzer/German SPECTRO,  Automatic digital carbon &sulfur analyzer,  Low-temperature impact testing machine,  60MT Hydraulic universal testing machine, etc.  Surface treatment  Heat treatment, planing, polishing, painting, etc.    Packing  As client's requirements   cast iron, gray iron casting, ductile iron casting, high quality and precise cast iron for machine tools, large and medium-sizedcasting products directly from our's factory
Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flowchat of Continuous Waste Tyre Pyrolysis Plant
Advantages of Continuous Waste Tyre Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Tyre Pyrolysis Plant
NO.
ITEM
Technical Parameter
1
Suitable Raw Materials
Small pieces of Waste tyre,rubber, waste plastic≤5cm
2
Operating Mode
Fully Continuous Operation
3
Structure
Horizontal Type Revolve
4
Loading and discharging
Fully Automatic Feeding and Discharging under High Temperature at Same Time
5
Capacity(24h)
8-20Mt
6
Work Pressure
Slightly Negative Pressure
7
Oil Yield of tyres
40%-45%
8
Reactor Rotational Speed
1R/M
9
Installation Power
110kw
10
Cooling Method
Cycle water
11
Type of Drive
Sprocket Wheel
12
Heating Method
Hot Air
13
Noise dB(A)
≤85
14
Main Reactor Weight (MT)
About 20Mt
15
Total Weight(MT)
About 45Mt
16
Installation Space Required
60m*20m
17
Manpower
2/shift
18
Shipment
5*40HC
19
Delivery time
≤70Days
Continuous Waste Tyre Pyrolysis Plant Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil Shangqiu Jinpeng Industrial Co., Ltd. , http://www.recyclingthewaste.com
Packaging Details: Nude packing or Wooden box
Delivery Detail: within 30-90 days upon receipt of deposit
Product Orientation
1.Focus on large/medium size castings ,as well as small size ones.
2.Gray iron/Ductile iron casting with Resin-Bonded sand casting process.
Our Services
Â
Transaction ProcessÂ
1.Sample or Drawing by customer
2.Tooling proposal&Discussion
3.3D Tooling Design
4.Tooling production
5.Rough parts manufacturer
6.CNC Machining
7.Fitting&Finish
8.Tooling Measurement&Check
9.Assembly
10.Trial Production
11.Correction
12.Final Trial
13.Samples Inspection
14.Sample Approval by customer
15.Tooling Approval
Â
Flask is the important technology equipment for automatic or semi-automatic moulding line. Machining by advanced CNC machine to ensure high precision and good interchangeability, dimensional inspect with CMM. Material of ductile iron, gray iron of high grade and welded-steel can be availabled, flask have high rigidity and can bear high pressure impact. We can design and manufacture different size of flasks for your requirement, also we manufacture of flask and pallet car according to drawings and technical specification of customer.
Company profile
Weifang Kailong Machinery Co., Ltd. is a science and technology enterprises, located in Weifang City Fangzi economic development zone, close to Weizhou Road, convenient transportation. Kailong Machinery is engaged in foundry machinery manufacturing professional supplier,design and manufacture of the following main products: flask and pallet car for moulding line, automatic static pressure molding line,Â
automatic, semi-automatic series of flask molding line, automatic slip flasks horizontal moulding line, semi-automatic pouring machine and the auxiliary machine of moulding line, mechanized moulding line,mechanized moulding line, BLT, JYB series of scale conveyor and various non-standard plate conveyor.
Through professional product and layout designing, we provide tailor-made solutions to customer. Based on advanced facility,better processing technology, strict processing control and quality inspection, we always believe in the conception of quality first and customer's satisfaction.
The company has always uphold the core values of "creating value for customer", and adhere to the principle of honesty and mutual benefit to get a win-win situation.With continuous innovation, we are committed to supplying our perfect products and best service to customers.Â
Mode of transport
FAQ:
1. Are you a manufacturer or a trading company?
We are engaged in casting machinery manufacturing professional supplier
2. How can I get some samples?Â
If you need, we are glad to offer you samples for free, but the new clients are expected to pay the courier cost, and the charge will be deducted from the payment for formal order.
Â
3. Can you make casting according to our drawing?
Yes, we can make casting according to your drawing, 2D drawing, or 3D cad model. If the 3D cad model can be supplied, the development of the tooling can be more efficient. But without 3D, based on 2D drawing we can still make the samples properly approved.
Â
4. Can you make casting based on our samples?
Yes, we can make measurement based on your samples to make drawings for tooling making.
Â
5. What's your quality control device in house?
We have spectrometer in house to monitor the chemical property, tensile test machine to control the mechanical property and UT Sonic as NDT checking method to control the casting detect under the surface of casting.
Â
Production Scope: Product Line
Dimension(L*W*H): Accroding
Weight: Customized Dimension, Different as Per Different S
Warranty: 12 Months
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Item Name: Foundry Sand Casting Moulding Flask
Material: Ductile Iron, Aluminum, Wooden, Steel
Application: Molding
Color: as Per Customer′s Requirement
Structure: Cope and Drag
Trademark: KAILONG
Transport Package: Wooden Package
Origin: Weifang, Shandong
HS Code: 8480100000
High quality Casting Moulding Machine moulding flask foundry equipment
Packaging &Â Delivery