4h210-08 Airtac Pneumatic Hand Push Valves

H Series Hand Push Valve
H Series Hand Push Valve is suitable for operating double or single acting cylinders in pneumatic control system. The valves can be used for wide range of applications. The valves can be mounted in-line.

MODEL Â	4H210-06 Â	4H210-08 Â	4H310-08 Â	4H310-10 Â
Fluid Â	AIR (to be filtered by 40μ filter) Â
Effective sectional area Â	14mm²(Cv=0.78) Â	16mm²(Cv=0.89) Â	25mm²(Cv=1.39) Â	30mm²(Cv=1.67) Â
Port size Â	G1/8  Â	G1/4 Â	G1/4 Â	G3/8 Â
Acting type Â	Direct drive type Â
Operating temperature Â	0-60ºC Â
Operating pressure Â	0-0.8Mpa Â

5/3, 3/2 WAY HAND CONTROL VALVES

• Simply operating.
• Large flow rate.
• Suitable for vacuum operation.
• Available for panel mounting
• 

H Series Hand Push Valve
H Series Hand Push Valve is suitable for operating double or single acting cylinders in pneumatic control system. The valves can be used for wide range of applications. The valves can be mounted in-line.

MODEL Â	4H210-06 Â	4H210-08 Â	4H310-08 Â	4H310-10 Â
Fluid Â	AIR (to be filtered by 40μ filter) Â
Effective sectional area Â	14mm²(Cv=0.78) Â	16mm²(Cv=0.89) Â	25mm²(Cv=1.39) Â	30mm²(Cv=1.67) Â
Port size Â	G1/8  Â	G1/4 Â	G1/4 Â	G3/8 Â
Acting type Â	Direct drive type Â
Operating temperature Â	0-60ºC Â
Operating pressure Â	0-0.8Mpa Â

5/3, 3/2 WAY HAND CONTROL VALVES

• Simply operating.
• Large flow rate.
• Suitable for vacuum operation.
• Available for panel mounting
• 

Constant Flow Gear Pump

Industrial Gear Pumps,Constant Flow Water Gear Pump,Hydraulic Constant Flow Gear Pump,Constant Flow Gear Pump

GRH , https://www.grhcn.net