Nozzle Cap is also called filter cap, drain cap, water cap, and backwash filter. It is used in the filter water distribution system and filter.
The stainless steel nozzle cap is a perfect replacement of the traditional plastic water cap in water treatment equipment. Our nozzle cap is a new generation of products in the water treatment equipment industry. The stainless steel nozzle cap enjoys the advantages of large circulation area (about 2-3 times of the same size plastic slot cap), long service life, safe and reliable, low comprehensive cost.
Nozzle Cap Nozzle Cap,Stainless Steel Nozzle Cap,Nozzle Dropper Cap,Close Nozzle Cap Xinxiang Shengda Filtration Technique Co., Ltd. , https://www.filtrations.nl
Technological parameters
    Model  : QF-50+35
1.   Screw diameter  : Φ50mm.
2.   Screw  L/D ratio : 25:1.
3. Â Â Extrusion output (Max.) Â : 70kg/hr.
4.   Extrusion outlet diameter  : Φ0.6mm - Φ4mm.
5. Â Â Line speed (Max.) Â : 200m/min.
6.   Pay-off type  : Active type single axis tension pay off
7.   Main motor power  : 11kw.
8.  Temperture control  : 5 segment.
9.  Cooling water trough  : "U" type single layer trough.
10.  Capstan power  : 4kw.
11. Â Accumulate length (Max.) Â : 250m.
12. Â Accumulate type : level way.
13. Â Take-up type: Double axis
14.  Take-up bobbin diameter  : Φ400mm - Φ500mm.
    Model  : QF-60+35
1.   Screw diameter  : Φ60mm.
2.   Screw  L/D ratio : 25:1.
3. Â Â Extrusion output (Max.) Â : 100kg/hr.
4.   Extrusion outlet diameter  : Φ0.8mm - Φ8mm.
5. Â Â Line speed (Max.) Â : 200m/min.
6.   Pay-off type  : Active type single axis tension pay off
7.   Main motor power  : 15kw.
8.  Temperture control  : 6 segment.
9.  Cooling water trough  : "U" type single layer trough.
10.  Capstan power  : 5.5kw.
11. Â Accumulate length (Max.) Â : 250m.
12. Â Accumulate type : level way.
13. Â Take-up type: Double axis
14.  Take-up bobbin diameter  : Φ400mm - Φ500mm.
Production line application
1. Â Applied for PLC controller, professional data control software, industrial computer Â
   control and storage display. It can modify technological parameters adjustable and
   monitor state of extrusion line.Â
2. Â Equipped with detecting system, auto-control feedback system, precise diameter and
   capacitance detecting feedback unit, entirely process control wire or cable insulation
   diameter and eccentricity parameter to insure the technological requirements.
3. Â The production line is applied for advanced special automatic cross head and dies for
   ensuring insulated thickness and eccentricity degree.
International  market
 USA, Italy, Korea, Vietnam, Thailand, Indonesia, Turkey, Iraq, Japan etc.
Cooperative partner
 America Tyco and Belden, Madison, Japanese Mitsubishi etc.
About us
   Qingfeng electrical machinery factory was found in 2000. It is located in Dongguan city, China. It is an enterprise which devotes to equipment technology research and design and manufacturing. Mainly engaged in  various wire, cable and optical cable equipment research, development and bulk production. We mainly manufacture various extruding lines, twisting machines and other peripheral equipments such as physical and chemical foaming extruding production lines, cage-type twisting machine, high speed double twisting machine, back twisting machine and coiling machine and so no.
    There are more than 100 people in our company and 30% is technologist. We have two factories outside and we are specializing in wire and cable machinery over 15 years. We have drilling machines, milling machines, cylindrical grinding machine, wire-electrode cutting machines, numerical milling machine, large numerical control boring and milling machine and CNC etc.Â
   For the past many years, Qingfeng has strengthened brand awareness fo service for building the China's first brand  and becoming an international competitive wire and cable equipment manufacturer. We have been successfully applied for the national patent for utility model patent technology. Now, we are applying for the GB/T9001- ISO9001 quality system authentication.
Customer service
1. Â We provide installation knowledge, machine testing knowlege and training operator freely.
2. Â We track maintenance service regularly for solving the problems in practice.
3. Â We provide the lifelong parts and technical support for our customer all the time.
4. Â We provide an all-rounded solution to wiring harness processing area for customer.
Â
   Applied for all kinds of international standard automotive wires such as AV, AVS, AVSS.
Technological parameters
    Model  : QF-50+35
1.   Screw diameter  : Φ50mm.
2.   Screw  L/D ratio : 25:1.
3. Â Â Extrusion output (Max.) Â : 70kg/hr.
4.   Extrusion outlet diameter  : Φ0.6mm - Φ4mm.
5. Â Â Line speed (Max.) Â : 200m/min.
6.   Pay-off type  : Active type single axis tension pay off
7.   Main motor power  : 11kw.
8.  Temperture control  : 5 segment.
9.  Cooling water trough  : "U" type single layer trough.
10.  Capstan power  : 4kw.
11. Â Accumulate length (Max.) Â : 250m.
12. Â Accumulate type : level way.
13. Â Take-up type: Double axis
14.  Take-up bobbin diameter  : Φ400mm - Φ500mm.
    Model  : QF-60+35
1.   Screw diameter  : Φ60mm.
2.   Screw  L/D ratio : 25:1.
3. Â Â Extrusion output (Max.) Â : 100kg/hr.
4.   Extrusion outlet diameter  : Φ0.8mm - Φ8mm.
5. Â Â Line speed (Max.) Â : 200m/min.
6.   Pay-off type  : Active type single axis tension pay off
7.   Main motor power  : 15kw.
8.  Temperture control  : 6 segment.
9.  Cooling water trough  : "U" type single layer trough.
10.  Capstan power  : 5.5kw.
11. Â Accumulate length (Max.) Â : 250m.
12. Â Accumulate type : level way.
13. Â Take-up type: Double axis
14.  Take-up bobbin diameter  : Φ400mm - Φ500mm.
Production line application
1. Â Applied for PLC controller, professional data control software, industrial computer Â
   control and storage display. It can modify technological parameters adjustable and
   monitor state of extrusion line.Â
2. Â Equipped with detecting system, auto-control feedback system, precise diameter and
   capacitance detecting feedback unit, entirely process control wire or cable insulation
   diameter and eccentricity parameter to insure the technological requirements.
3. Â The production line is applied for advanced special automatic cross head and dies for
   ensuring insulated thickness and eccentricity degree.
International  market
 USA, Italy, Korea, Vietnam, Thailand, Indonesia, Turkey, Iraq, Japan etc.
Cooperative partner
 America Tyco and Belden, Madison, Japanese Mitsubishi etc.
About us
   Qingfeng electrical machinery factory was found in 2000. It is located in Dongguan city, China. It is an enterprise which devotes to equipment technology research and design and manufacturing. Mainly engaged in  various wire, cable and optical cable equipment research, development and bulk production. We mainly manufacture various extruding lines, twisting machines and other peripheral equipments such as physical and chemical foaming extruding production lines, cage-type twisting machine, high speed double twisting machine, back twisting machine and coiling machine and so no.
    There are more than 100 people in our company and 30% is technologist. We have two factories outside and we are specializing in wire and cable machinery over 15 years. We have drilling machines, milling machines, cylindrical grinding machine, wire-electrode cutting machines, numerical milling machine, large numerical control boring and milling machine and CNC etc.Â
   For the past many years, Qingfeng has strengthened brand awareness fo service for building the China's first brand  and becoming an international competitive wire and cable equipment manufacturer. We have been successfully applied for the national patent for utility model patent technology. Now, we are applying for the GB/T9001- ISO9001 quality system authentication.
Customer service
1. Â We provide installation knowledge, machine testing knowlege and training operator freely.
2. Â We track maintenance service regularly for solving the problems in practice.
3. Â We provide the lifelong parts and technical support for our customer all the time.
4. Â We provide an all-rounded solution to wiring harness processing area for customer.
Â
Model NO.: QF-50+35 / QF-60+35
Heating System: Electric
Customized: Customized
Precision: Precision
Voltage: 380V
OEM Service: Available
Electric Brand: France Schneider
Belt Brand: Switzerland
Power: 3p/380V
Demoulding: Automatic
Trademark: SFS
Transport Package: Shipment or Wooden Box (Required by Yours)
Specification: CE, SGS, RoHS
Origin: Dongguan, Guangdong Provice
HS Code: 8477209000
Model NO.: QF-50+35 / QF-60+35
Heating System: Electric
Customized: Customized
Precision: Precision
Voltage: 380V
OEM Service: Available
Electric Brand: France Schneider
Belt Brand: Switzerland
Power: 3p/380V
Demoulding: Automatic
Trademark: SFS
Transport Package: Shipment or Wooden Box (Required by Yours)
Specification: CE, SGS, RoHS
Origin: Dongguan, Guangdong Provice
HS Code: 8477209000
   Applied for all kinds of international standard automotive wires such as AV, AVS, AVSS.