1.We have professional team to make different kinds of roll forming machines for our customers, from designing, processing,assembling, debugging, delivery. 2.we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,visa,accormadation,food and transpotaion in your country. 3.You can send your men to our factory. we will teach them how to operate the machine without training charges. 4.Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manaul first ,and get familiar with the machine. Then we can get a video call,and teach you on-line  how to operate the machine. 5.Apart from above training course,we also provide 1 year warranty for all the easily broken part of the machine for free and whole-life technical service support. If there is any problems happened to the machine, we will provide solution at once. Hope we could establish win-win business relations in the soon future!
Different casting methods have different mould preparation contents. The most widely used in sand casting for example, mold preparation including shape material preparation and other core two items of work. Sand casting is used to form the core making all kinds of raw materials, such as casting sand, sand binder and other materials, and the preparation of sand, sand, paint etc. are collectively referred to as the molding material molding material preparation task is in accordance with the requirement of the casting, metal properties, selection of sand and binder and accessories. Then according to a certain proportion mix them into the sand and core sand with certain properties. The commonly used sand mixing equipment has the wheel type sand mixer, the counter current type sand mixer and the blade groove type sand mixer. The latter is designed for mixed chemical self hardening sand design, continuous mixing, fast.
Photo of our Casting Structures:
Casting is a more economical way to produce a blank, which shows its economy more than the complicated part. If the car engine cylinder block and cylinder head, propeller and exquisite works of art, etc.. Some difficult to cutting parts, nickel based alloy parts such as gas turbine without casting method can not be formed.
Now the casting factory uses the modelling method, in the past ten years did not have the big change and the modelling technology to have the big progress. On the wet sand and sand mold, precision die casting are described as follows.
Casting Structures Ball Joint,Steel Liner,Casting Bend,Casting Structures Unisite Group Ltd. , https://www.shipsparts.nl
Product Description
Component and Function  Coil Feeding Equipment
Consists of one hydraulic decoiler with capacity of 5000kgs and its base. The steel sheet is automatically fed to the leveling equipment under the function of friction and traction. It is a active decoiler, decoil speed can be matched the cutting machine speed which control by a switch, and has a press arm to press the coil to avoid the coil loose during turning. Also the hydraulic station is separate, it is off without expanding, which can save the power. It is only for this decoiler, so it can be used separately.
Â
Guiding Equipment:
Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.
Slitting device:Â
The machine has three rubber pinching rollers to driving the sheet. Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet. This device slits the sheet, adjust the slitting blade and can slit different size. And there have guage device, so it is convenient to adjust the slitting size manually.
Extension deivce
Which is in front of recoiler and mounted with recoiler together, it extension the sheet so can wind a tight coil, also it has partition to divide the sheet separately.
Recoiler part
Include stand, reducer device, recoiler shaft, recoiler expander device, mechanical support arm.
Â
PLC Control Panel
The electric controlling system of this machine consists of five parts: operating
system, screen, PLC, transducer and strong electricity part. The controlling system of
this machine are imported from Panasonic company of Japan. The system usesÂ
modularized structure and has convenient, reasonable, canonical wiring arrangement,
and its maintenance is quite easy. The independent operating console facilitates the
mutual dialogue between the operator and the machine. The operation is easy and
steady and can be chose operation by manual or automatically.
Â
Â
Standard Equipment of Machine Â
5T Hydraulic decoiler               1pc
Main machine              1pc
5MT hydraulic recoiler        1 pc
PLC Control Panel            1pc
Hydraulic station            3 pc
Components of line
Our service
FAQ
Q:How is this machine's service life?
A:In the normal maintenance,the service life at least 8 years.
Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,replace the hydraulic oil every 1-2 years.
Q:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,if the broken parts can't repair,we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.
Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.we have rich experience in transport.
Q:Mr.Alan,can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.
Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.
Q:Can you supply the raw materials?
A:Yes,we can supply the galvanized steel coil,galvalume steel coil,color steel coil,and aluminum coil.
Contact us
Â
wet sand molding method. Mount company believes that: suitable for most of the metal materials, mass production of the modeling method, the clay wet sand shape is the most economic modeling method. The casting factory is equipped with the control device of the latest technology, we should gradually achieve, with green sand control technique can be repeated to get the best performance. These control devices include, screening and separation of metal, back to the sand with the cooling, back to use sand mixed practice accurate release additives, etc..
Slitting Speed: 10-30mm/Min
Driving Motor: 11 Kw
Slitting Shaft Diameter: 100mm
Cutting Thickness: 1-3mm
Shearing Blade Material: 12crmov
Cutting Station Power: 5 T
Max Coil Weight: Gcr12
Decoiler Speed: 0-30m/Min
Hydraulic Station Power: 4kw
Raw Material: Pre-Painted Steel
Trademark: Tianyu
Transport Package: 20FT Container or 40FT Container
Specification: 6000*1000*1100
Origin: China
HS Code: 8462219000
CNC thin plate uncoiling cut to length and slitting line machine