Medical Bottle,Pill Glass Bottle,Oral Liquid Glass Bottle,Injection Glass bottle Xuzhou Bolite Import & Export Trading Co.,Ltd. , https://www.xzbltglass.com
Model
SL-150SX
Cooling capacity
kW
151.7Â
X104cal/h
 13.1
Unit power
kW
77.6Â
Run controlÂ
Use PLC microcomputer control
Unit current
A
Â
Power supply
380V/3N/50Hz
compressor
TypeÂ
5:6 asymmetric twin-screw compressorÂ
Cooling input power (kW)
67.6Â
Cooling operating current (A)
113.6Â
Energy regulation
0-25%-50%-75%-100%
condenser
Fan quantity
6Â Â
Total input power(kW)
10.2Â
evaporator
Inlet/outlet water pipe connectionÂ
DN100
Water flow rate m3/h
28.1Â
Water pressure drop(kpa)
41.1
Outline dimension
Length*Width*Height(mm)
2200*2000*2800
Refrigerant
R22
Unit weight
kg
3150
Â
Note: for further information please contact me.
Ms. Echo Lee
Tel: +86 21 35324169-206Â
Mob: +86 18217219074
Â
Â
China Venttk Manufacturer Industrial Water Chiller
Product Introduction
Clean Energy
The unit is driven by clean energy—natural gas with less combustion exhaust and contamination, which dramatically reduces greenhouse effect and is beneficial to energy reconstruction.
Peak Load Shifting
Air conditioner requires sharp increase of electricity supply, while gas fired chiller facilitates the electricity and gas peak load shifting, which reduces the tension of electricity/gas supply network and operation cost.
Natural Working Medium
It adopts MR717 as working medium, no harm to ozone instead of fluoro-containing refrigerant.
Ultra-high Temperature Cooling
The chiller can operate stably under the ambient temperature which can be up to 55°C, to provide users a comfortable living and working space.
Ultra-low Temperature Heating
The heat pump can operate stably under the ambient temperature which can be down to -20°C, to provide users living and working space as warm as in spring.
Cooler or Freezer? Cooler and Freezer!
The chiller not only can be used as air conditioner for residential & commercial comfort, but also provide a freezing environment that is below 0°C for industrial cold storage.
High Temperature Hot Water
The heat pump produces hot water up to 65°C for air conditioning, floor heating, DHW (domestic hot water) and swimming pool, etc.
Inverter Technology, Energy Saving
DC inverter motor could adjust fan speed automatically according to ambient temperature to reduce energy consumption and running cost.
Feature
STRUCTURE
Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
HERMETIC COMPRESSORS
Single phase type (mod. 6.5÷8) and 3-phase (mod.10÷50) scroll type compressors, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
EVAPORATOR
High efficiency tube in tube heat exchanger (mod.6.5÷50), shell and tube heat exchanger (mod.65÷210), factory insulated with flexible close cell material.
CONDENSER
High efficiency tube in tube heat exchanger (mod.6.5÷50), shell and tube heat exchanger (mod.65÷210), factory insulated with flexible close cell material.
REFRIGERANT CIRCUIT
Copper tube connection with charge valves, filter, thermostatic expansion valve, gas-liquid separator, high pressure switch and low pressure switch. The heat pump units are complete also with 4-way valve and one way valve.
HYDRAULIC CIRCUIT
No build in water circuit as standard.
ELECTRIC PANEL
Consists of:
Compressor contactor,
Compressor protection breaker,
Microprocessor with function display.