MH Type Electric Hoist Girder Gantry Crane is used together with CD MD Model electric hoist. It can be matched with various electric wire rope hoist and chain hoist, to meet the different requirements of customers to improve the working efficiency. It adopts the optimized design of main beam to keep the strong stability and stable braking and precise location when crane in the low dead weight. It is the best solution of light load and short span.
This product is a regular crane widely used at open ground and warehouses to load, unload or grab materials. It has two controlling methods: ground control and cabin room control.
We can provide you all kinds of MH type electric hoist gantry crane, truss gantry crane, other accessories are also available such: Crane Remote Control, insulated conductor rail and Hoist Hook , and also the Grab Bucket , with us you can enjoy the one stop service.
Sketch
Parameter
Lifting Capacity
T
3
5
10
16
20
Operation method
Pendent line with push button/ cabin
speed
Lifting
m/min
8, 8/0.8
8, 8/0.8
7, 7/0.7
3.5
3.5
Cross travelling
20
20
20
20
20
Long travelling
ground
20
20
20
20
20
cabin
30, 40
30, 40
30, 40
30, 40
30, 40
Motor
Lifting travelling
Type/kw
ZD41-4/4.5
ZD141-4/7.5
ZDS10.8/4.5
ZD151-4/13
ZDS11.5/4.5
ZD151-4/13
ZD152-4/18
Cross travelling
ZDY12-4/0.4
ZDY121-4/0.8
ZDY21-4/0.8×2
ZDY21-4/0.8×2
YZD-4/0.8×4
Long travelling
ground
ZDY21-4/0.8×2
YZR132M1-6/2.2×2
YZR160M1-6/6.3×2
YZR160M1-6/6.3×2
YZR160M1-6/
6.3×2
ZDY21-4/1.5×2
YZR132M2-6/3.7×2
YZR160M2-6/8.5×2
YZR160M2-6/
8.5×2
cabin
ZDR22-4/1.5×2
YZR132M2-6/3.7×2
YZR160M1-6/6.3×2
YZR160M2-6/8.5×2
YZR160M2-6/
8.5×2
ZDR24-4/2.2×2
YZR160M1-6/5.5×2
YZR160L2-6/11×2
YZR160L2-6
/11×2
Electric hoist
Type
CD1/MD1
CD1/MD1
CD1/MD1
CD1
CD1
Lifting height
m
6,9
Working duty
A5
Power supply
380V 50HZ 3phase AC
Span
m
12,16,20,24,30
Detailed image
Single Girder Gantry Crane Single Girder Gantry Crane,Small Gantry Crane,Aluminum Gantry Crane,Adjustable Gantry Crane Jiangxi Mide Industrial Co., Ltd. , http://www.midecrane.com
Specification:
Diameter: Φ 45mm-Φ 200mm
L/D ratio: 16-35
The compression ratio of screws can be designed according to different products and ingredients
Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
(3)4Cr5MoSi V1 (JIS SKD-61)
(4)9Cr18MOV
(5)HPT
Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year.
Focus on quality and service.
Experienced manufacturer, we will be the best choice.
